3 in 1 Aquarium Air Pumps, Water Pump, Water Filter for Fish Tank

preview_player
Показать описание
Aquarium Air Pumps, Water Pump, Water Filter for Fish Tank

👇SUBSCRIBE👇
If you love watching my content then don't forget to
👍Like the video
🔗Share the video with your friends
👇Put your feedback/queries down in the comment section, I would love to check it out
Рекомендации по теме
Комментарии
Автор

Nice design, but with that huge pipe you're wasting a good opportunity. Biomedia works best remaining clean as possible. Using a wider container, you could then have several layers of sponge filters fill the entire container....THEN fill the pipe with the biomedia, this way only clean water would be hitting it. Also, the air bubbles hitting the media would also be cleansing to keep anarobic bacteria from infecting it.

craigathonian
Автор

Det är ju helt briljant, vilka öppningar för energibesparing.
Fantastiskt!

TheSotarn
Автор

The only thing I would do differently is, instead of the filter pad being on top holding all the garbage in the bio media, I would line the container walls with a filter pad and put the media in the middle of the container that way only clean water touches the media and it can do its job of eliminating ammonia, nitrites, and maybe even nitrates (depending on the media you use) without getting clogged up.

thomasashe
Автор

Congratulations! You have invented an airlift filter :) But implementation is interesting

patriskin
Автор

Put the filter floss on the bottom or along the inside walls so that the media doesn't get clogged with debris. Also might as well run two air stones on that double pump. 😊🥂👍

pullbackbaby
Автор

Thank you very much Indonesian friends present

Ikram-hqrz
Автор

Bạn chế tạo hệ thống tự động nước rất sáng tạo chúc bạn có nhiều người mến mộ

thaoduocphongtriungthu
Автор

Aerator jadi pompa Dan filter Mantab...

👍👍👍

avaksaputra
Автор

Brilliant. I did this. 100% working. from Sri Lanka

dasunanuradha
Автор

I would be to cut a piece of filter sponge/mat to size and rap around the inside covering the holes to provide mechanical filtration before the biological filtration, otherwise a good filter.

steveakam
Автор

👏🏻👏🏻👏🏻 Parabéns, vídeo fantástico, nunca havia visto isso antes, maravilhoso projeto 👍!!!

lifefish
Автор

Great idea but a smaller diameter lift tube will give you MUCH better flow rate. The large diameter pipe will be limiting pressure from the air stone.

callumberry
Автор

Very interesting, I just wish there was some detail as to what is being implemented. It appears to be an air pump only and its being used to create an upward vacuum which pulls water through the media and airates as well, would this work with more dense media? Few helpful details under the video would go a long way. Thank you!

smd
Автор

Now I got this idea very much appreciated.

paktoysreview
Автор

So the Biomedia gets flooded with unfiltered Water. You should allways let the Sponge do the first Filtration that the Pores of Biomedia dont get extremely dirty.

gregman
Автор

your bio media should have been above the filter floss because right now all the debris is going to clog the bio media as its first in line. Also I'd say instead of hot glue, silicone (aquarium silicone) should be used to hold better. Good general idea but honestly not worth all this effort to build something for such a low rate of filtration. Filters can be had pretty cheap with pumps.

svtcontour
Автор

Bạn làm hay quá bạn sáng tạo hay mến chào bạn hiền chúc bạn vui

Автор

Don't you think that filtration is kinda bit small for that pond?

Johnny-WaIker
Автор

Bạn bỏ cái bô ý đi và để nó ở lơi chảy ra. Nó hiệu quả hơn nhiều và vệ sinh nó cũng rễ hơn đó

motnguoiban
Автор

Thank you. Follow exactly the vid and just less than 10 dollars, I have water filter and air pump.

chematbaker