I Doubled the Power of my Scooter! Phantom F12 70cc

THE F12 FIRST RIDE........INSANE!!!!
After rebuilding my Malaguti phantom f12 and going to a water cooled conversion, I finally got to put my Stage 6 70cc MK2 Racing engine to the test!
Inner rotor ignition is a game changer!
-
-
NEED SCOOTER PARTS? USE CODE "MOPBOYZ" & SAVE 5%. CLICK HERE:

[bareframe]

F12 is a certified ripper😍! Small side notes:
The bog from the start might be the shimming, belt not going it's full travel. Or it would prefer 4-4.2gram rollers.
A lot of new S6 R1200 / R1400 / R/T MK2 exhausts leak from the silencer. In Europe we just put gasket maker on it, let it cure for a couple hours and go full throttle. Sounds a bit ghetto but it works.
Waiting on that disc brake conversion!!

[deniscordova]

Hey brother, watching from Puerto Rico, I have a F12 LC foggy. I've just finished watching the whole series and you have motivated me to build mine. Haven't even started in years, so wish me luck 😅

[cavman]

What a ripper such a nice bike can't wait to see it dialed in 100%

[LEFIH_DJ]

insane build ! good shit
I live in vegas but I grew up in france and used to own a mbk booster with a malossi MHR 70cc, Malossi MHR exhaust, internal rotor ignition MVT, stage 6 crankshaft, transmission kit overrange MHR and a carburator PWK 26, this thing was flying, I always wanted to try to swap it to liquid with a mbk nitro engine but I grew up and left my scooter behind haha

Love your channel, it makes me wanna buy one again and im 34 yearsold today haha
keep up the good work man !

[harrynelson]

When the wind slows you down faster than the brake 🤣🤣❤️🇬🇧

[Antejog]

that thing rips, good job on the build

[nxstatic]

16:29 is that a gah dayum speed coil from roblox

[nickk]

Hey man, greeting from Italy. Those things (Yamaha Aerox (GP1) and Yamaha BW’S as well) were all the rage in the 2000s. Some tips, a common mod back in the day was to install a GP1 radiator as well, in order to get usable temps on higher end cylinders. Also, as you already noticed, you should get the rear brake situation sorted out. Idk if you know this, but the Phantom was also sold with a read disk brake, you could try to get the casing with the disc and caliper mounts, as I don’t know if adapting a disc setup was possible with the drum brake casing

[fransk]

new road 100cc
the second tune you made with the stiff contrast spring is actually most of the tunes you can hear in a '' 100cc malossi trofeo '' races, they get all the torque for those sketchy curves in the Magione track , you got that sweet spot with the soft contrast and it really fits on a 70 cc, altough a stiffer one is better from 86 cc and above

[dannybv]

Good job ! This is a very nice and taste tuning on this scooter . Keep up the good work !

[exgtt]

The F12 is my fave - love the Foggy rep. My Ludix Blaster runs a very similar rads and header tank set up. For easy bleeding just prop up front wheel and give it a few braaps with the tank cap off. Usually gobbles down another 200-300ml of coolant. Careful running too cold, chance of cold seize. Consider a thermostat 👍 great vid

[idelstream]

lose the stage six exhaust get an yasuni c21 !, carb air screw 1 1/2 turn. try and get full malossi overrange. if you want to go full wheely mode get and polini speed control vario. nice bike you have there! i owned 2 my self.

[cyph]

It's always a good day with another MOPBOYZ upload

[andystoolbox]

My silencer flew off my stage 6 pipe on the road back when I had my stage 6 bike with a sports cylinder. That bike would do 60mph easily. I blew up that cylinder from bad squish clearance. piston was hitting the head. I parted out that bike after that. I have a ruckus clone bike now, with a 100cc stock engine and a v8 pipe. other than that stock. It does about 55mph no problem. I am much happier with the speed vs. $$$ spent considering I had over 1000$ in the first bike, and less than 500$ in this one with less problems. Thanks for the share love the makita battery.

[Mr.Elusif]

I get so excited over these ped build now haha. Love these vids man

[Jwm]

I love your Videos best Scooter Channel Out there greetings from Germany

[cooperthompson]

The makita battery conversion is cool as hell

[Robbiemega]

Been waiting all week for this one to drop its a beast 💪

[slimkabelo]

actually i have got an f12 liquid cooled from the factory, i think the frame is a little different because that coolant reservoir actually mounts inside the glove box

[brennansage]

What a beast, and the wind was wild the otherday.