Installing Belltech 3” Drop Spindles (part 2)

How to put drop spindles on an 87 Chevy c10

[hectorrivera]

Thanks guys for putting this out there. Super informative, and took a lot of the stress and guessing work out of it. Thank You.

[brianwatson]

These videos are better than the ones brothers truck parts put out! 👍

[frankrobbins]

Excellent video! Especially pointing out the brake line interference challenge and the ralley wheel to lower A arm interference.

[jonneiman]

Love the video.if you could speak louder.

Thanks

[sbendigphoto]

Subscribed and liked because you've shown every gritty step unlike most other videos who assume you know the simple stuff and skip past it:(

[iracelegendsw]

Your front license plate is upside down....:)

[ajgarrard]

Great video, I have the same truck only 1986, question is: what is your tire size?? And is the lower arm rubbing a rally wheel problem? Thank you

[beardedg]

Well I had to grind the ball joints metal from the spindles and lower control arm lip..y still grind when turning it's hitting the lower control arm I'm about to get some 1" spacers, has someone had the same problem??

[derrickmorgan]

Did have any problems with your bakes after bending your line?

[martinchacon]

Did you use 3100 or 3200 belltech spindle. I ordered 3100 but ball joint would not fit when I went to install. I want to make sure I order the right part next time. My brake is 1”

[jamesarnold]

I have a 1986 GMC that I want to lower and keep the 15 inch wheels, how much should I lower it to make it look good ?

[oldschoolman]

I am going with Belltech I measured 1” rotor, so I believe I need 3200 .
I’m thinking of just cutting original coils and reusing, did you use lowering shocks? Looked like bell techs
Thanks great video

[elcolibri]

What diameter is the tip of the shaft where the roller works?

[MrRobe]

Where did you get your parts?
Great Video thank you

[oldschool-efjz]

How much is rear lowered and how was it lowered Thank you

[johnarellano]

This video is a prime example of what sheer disappointment sounds like lol, they did a great job…..but we all know as men….when you get the look you want you will have no problem being vocal about it.
But when you don’t get the look you want you do exactly what these guys did….stare in pure disappointment lol.

[squarebodybuilder]

Great detailed video series. I noticed the drop spindles instructions say to use a wheel spacer if interference is an issue on the lower spindle. I wonder if that would help from having to grind it?

[JMCHAVEZCAD]

Great video guys!!! hope my weekend goes as smooth as this lol...

[JohnSmith-qjcf]

What is the difference from your truck a arms to a chev van G20 and G30 thks

[danny_arizona]

Great video guys, really answered the intricate questions that are sometimes passed when making these videos,