Inkjecta Flite Nano Titan Review

Review of the Inkjecta Flite Nano Titan. Specs, the good and the bad, and of course my unsponsored opinions, all the info you’ll need in a rambling and unprepared format as usual!
My Instagram has changed since I uploaded! You can now check out my work on Instagram @anthonyjenkins_et

[Nathwindon]

You are really well spoken, thanks for a non-emotional and unbiased review mate.

[NicowonkeR]

Hey man! Watched all your videos and they helped me out a ton. The reason I am commenting is that I run into a big issue with the Inkjecta and I can't wrap my head around the solution.
First things first, thanks to you I got the Inkjecta Nano and ditched my Xion because the hit was to spongy. Now, I've fallen in love with the Nano very fast, using a rigid bar and a 3.5mm stroke, lining small stuff (3rl + 5rl and whipshaded dots for texture).
The problem that occured is that after some use (lets say 1 hour) with the same cartridge (using Kwadrons) the inkflow is starting to get worse and worse, disrupting the lining process visibly and I notice some Ink residue thats drying up in the cartridge while I'm tattoing and I think that causes the issue. Atleast thats the only thing that I can think of, having tried numerous attempts at troubleshooting:

I already talked with colleagues and brainstormed for a solution, adjusted the give so the needle doesnt stick as far out, make sure to not use a lot of vaseline so it doesnt get into the tube, make sure I wipe very carefully excess ink on a papertowl when its dripping without getting paper inside.

My head is exploding and it sucks so much. Tattooing and being concerned about it and questioning when the inkflow starts to get shitty. For now I have to switch to a new needle after 1 hour but that certainly cant be the solution?

Maybe you can help me out here, I sadly don't know any tattooer that uses a cartridge machine personally.
Cheers

[JamesMinerTattoo]

Best reviews, hands down. Thanks man.

[GetRichOrWorkTrying]

Can you do a review of the new eclipse bro? Always love your reviews and work 🙌🏾

[thepoeticpage]

Awesome and sincere review: thank you!

[monakurland]

First of all, thank you so much for your amazing reviews! I really like your honesty. It helped me a lot. I have one question though, I have always used coils but its getting to heavy for my hands because I am doing really fine lines and dot work for hours and hours. So I decided, my next machine will be a pen. What machine do you recommend for my style? I'm not sure yet... Bishop Fantom, Inkjecta Elite Nano or even something else? It hard do decided...

[marcosvangogh]

How do you adjust how far you have the needle out without an adjustable grip?? I'm fairly new to tattooing and dont quite understand the internals.

[karlojuratic]

Hi great vids and channel. Question, im doing lot of tiny tatts (1 i 3 RL), scripts and polymesian/viking tattoos and now Im searching for new machine Filght Nano is still in the lead but Im also looking for FK Xion or Axys Valhalla :/ can you help with advice

[williamvillarreal]

I’m totally selling or trading my xion for a inkjecta nano. I use to run one, and I’m sad I got rid of it but I needed to at the time.definitely going back to nano though!

[dupinion]

Hi, I had a look at your work which look top notch. I have a couple of questions. What machine would you recommend for color realism - layering if you were to use only one? a) is Inkjecta Nano Elite a good choice? b) also what crank/stroke you’re using with your Inkjecta – is it a standard 3.2 mm? c) do you have any experience working with Cheyenne Spirit and is 2.5 mm stroke enough for color realism? They now have MkII version of Spirit but it doesn’t seem like any big step forward from the previous version. d) what about vibrations these machine produce – Inkjecta and Spirit? e) Are Bishops either Fantom or Microangelo a good alternatives to Inkjecta (for color realism). A few questions to answer :), but if you find spare moment I’d appreciate your feedback greatly. Thanks.

[mariosolano]

Thanks a lot for your excelent explanations! Man is it possible for you to test the Art Driver z3 and compare it with this machine ?

[jayrockskelly]

Thanks for the review mate, very good, really clear and informative and well presented. I know your busy, but if you have time to answer a question for me . I would really appreciate your thoughts. I'm using coils for a good few years. Always liked to run fast and hit hard. But now I'm tired of the constant messing around with them. Tried a few rotarys, and found them too slow and not hard hitting enough for me. But I still hoping there is one out there for me. One that hits more like a coil, also I prefer a large heavy grip. l'm really a fan of the more traditional style tattoos, rock solid lines . I'm now stuck between getting the bishop phanton and the inkjecta. Could one of these be the answer I'm looking for ? Thanks, and thanks for the reviews

[brianthevenot]

About the vibration ? How do you feel it in comparison to a pen ? I got a Cheyenne pen so do you think you feel less vibration with inkjecta or pen for exemple. Thanks and Nice vidéo 👌

[nr]

Hey! My machine is can't work when I put on the cartridge on it. What's the problem? It's work without cartridge like a horse but when I put on the cartridge the motor is just stuck can''t moving. I just tried some different cartridges and grips but no luck.

[jonathanromo]

Hey bud, I love your reviews. But I have a question regarding this machine. I do a bit of neotraditional work so I’m used to pulling fat chunky lines, do you ever snag or hook skin when using this machine to line? I have the 3.25 stroke that comes with it and Im using a rigid bar, running it at about 14V for softer areas. Could I get your thoughts on it?

[Aebl_]

Which hits harder the semi rigid bar or the thickest torsion bar?

[Luekillah]

In what position do you set up the RPG click grip? I cant really figure out if pushing it to the top, middle or far down? Im thinking if there is a ”scientific” way depending on the CAM size, cartridge needles, etc etc..

Really appreciate your videos and response, keep up the good work.

[scoobymiranda]

thank you for your review!!! i have the bisop and the same nano titan, and yet, i keep going back to the titan. I actually run the lining around 10 to 10.2v and color packing around 9.5v but still scratching my head what voltage to use for stippling. any suggestion? same as bishop fantom? im using critical tattoo supply and going against my eikon, it does play a big part with the led light. i also tried chinese knock off and it will definitely tell by its blue light if your having polarity issues as i see it on my line work when using a knock off power supply and cheaper rca cable and my go to rca right now is the bishop and the connectivity really smooths the healing process.

[kenrickfray]

Anthony im a traditional work (old school) style tattoo artist.. still using coil. I have change now to cartridge with disposable grip on the coil.. and i love the cartridge system. That sabe me a lot of time. But im thinking of buying a rotary tattoo machine or a pen style machine.. i do a lot of lining works.. traditional.. and black and gray work..
I like to know what will you recommend me.
For now my first choice on my list after a lot of research is the
Inkjecta (titan) but im still thinking between..
inkjecta titan, bishop fantom, sol nova pen, bishop wand pen, with your experience what do you think will make me happy.. 😁
Switching from coil to ratary or pen..

I do a lot of small works.. names etc.. a lot of black filled work.. but trying to start doing more and more black and grey.. im not a profesional artist but im on my way.. 🙏🏼

Thanks..
and keep doing you good reviews.. straight to the point..

[pappedelic]

What set up u sing for lining 9, 11, 14?