Programming 2019 VW Atlas Garage Door opener / remote

This video describes how to program the garage door “homelink” remote buttons on your 2018 or 2019 Volkswagen atlas

[El_Mexicano]

Have watched other videos and spent forever trying to get the atlas and garage to sync. This video did the trick and works!!!

[jasonlockhart]

Works like a charm. Thanks!!!! Manual just doesnt say hold button til you get the green light. That's the key step.

[zingarmtz]

Thanks! This worked for our 2020 Tiguan.

[TheBajamin]

Thanks so much. This isn’t in the manual, I looked. Just bought a 2024 and it’s essentially the exact same thing.

[quintenedwards]

Thank you for the video. Just the information I needed.

[negenius]

On some garage door units after pressing the button for programming and it flashes, you will have to press the learning button on the physical opener and you have 30 seconds to press the programmed key inside the Atlas to verify.

[linali]

Thank you! I did it! Thank you for sharing, it is really helpful!

[tonyzac]

I got the Atlas 2019, i dont get the flashing orange light, i get the solid green. Ive even tried the pressing 1 and 3, and get the solid orange, until i let go, nothing happens

[nxtlightdesign]

Reset first! - This video doesn't say that if the unit has already been programmed, you have to perform a reset first. - Hold 1 and 3 in for 10 seconds. Then follow the video.

[javawithjen]

So the instructions in this video didn’t work. My manual says to point my garage door clicker at the STEERING WHEEL while programming. My steering console made a noise and then my garage door button worked. So the steering wheel has an important sensor for this process. In the video he pointed his clicker at the buttons he was programming. That’s not the method at least with a 2019 SE.

[waruneeth]

My VW Atlas Cross Sport 2020 doesn’t have the number or even under the mirror

[dennishynes]

what if it doesn't? I got the green light to come on and flash, but garage door opener still doesn't open the door