AIPL ABRO || No More Nails - Industrial Grip Adhesive

Stop ruining your wall with nail drills & dents!
Why drill a hole, when you can get better results with paste, press & hold?

Neat isn't it! (Quite literally)

INTRODUCTION
AIPL ABRO NO MORE NAILS is a general-purpose construction adhesive suitable for your DIY and Repair Jobs. It is a solvent-free synthetic rubber-based adhesive meant to completely remove the use of Nails and drilling out of your life and walls. The adhesive gives you an instant grip and provides more strength on the wall.
It can also be used as a bonding agent when replacing tiles on the wall. Our product can be used by anyone because it is safe and easy to use. Use it for quick and reliable results during interior or exterior general construction work.

FEATURES
- Strong Adhesive
- Strength Water Resistant
- Strong Panel Adhesive
- Resistant To High & Low Temperatures
- Resistant To Slump & Chemicals
- Ideal for interior and exterior applications
- No Need For Drilling
- Bonds a variety of construction and building materials.

USE CASE SCENARIOS
As an adhesive for installation of wall and floor panels. In most bonding applications where high strength, gap-filling, single component adhesive is required. Suitable for most common building materials, e.g. wood, ceramic, metal, concrete, brick, stone, plaster and most plastics Suitable to use on foamed polystyrene. Ideal for mirror-backed tiles and skirting board adhesive.

HOW TO USE

- Surfaces must be clean, dry, structurally sound and free of foreign material.
- Cut the tip of the cartridge to a suitable size. Load cartridge into caulking gun.
- Apply a continuous bead or strip to the surface of the material at a distance of 20 cm to 40 cm.
- Firmly and evenly press material into position or use a rubber hammer to tight the bonding.
- For heavy materials use the “power bonding method”.
- Attach, detach, wait for 5 minutes, then fix again and tap firmly into position.
- It will be fully cured after 24 hours.