DIY Quick Vacuum Fixture Test

preview_player
Показать описание
  1. msimpson20175
  2. Kronos Robotics
  3. KRMx02
  4. DIY
  5. CNC
Рекомендации по теме
DIY Quick Vacuum 0:01:05

DIY Quick Vacuum Fixture Test

DIY CNC single 0:00:22

DIY CNC single vacuum fixture test

Wire Harness zero 0:00:09

Wire Harness zero force pnumatic with vaccum testing fixture.

A simple diy 0:00:50

A simple diy vacuum fixture I designed for MakeIct.

More on the 0:00:59

More on the vacuum table testing. Trying to pull suction through #mdf spoil board. #cnc #testing

How To Make 0:08:50

How To Make Easy Vacuum Fixtures For CNC Machines | CNC Router

Testing the vacuum 0:00:21

Testing the vacuum fixture

Vacuum Clamping For 0:00:20

Vacuum Clamping For Woodworking 💪

1st vacuum fixture 0:00:55

1st vacuum fixture

Vacuum clamping fixture, 0:06:39

Vacuum clamping fixture, easy construction and effective.

Desktop CNC Vacuum 0:01:01

Desktop CNC Vacuum Holding Solution

Vacuum Chuck Quick 0:01:31

Vacuum Chuck Quick Shot 1

Best Practices for 0:00:37

Best Practices for VACUUM Workholding | Machining Tips

Assembling vacuum table 0:00:15

Assembling vacuum table test no.2. Still just messing round with ideas. Getting lots of help!

SmartVac Vacuum Chuck 0:03:06

SmartVac Vacuum Chuck System Overview

Sealing up the 0:00:30

Sealing up the vacuum table. #woodworking #cncrouter #cncmachine #woodfinish #woodfinishing

Vacuum Table on 0:01:00

Vacuum Table on Desktop CNC Machine

Customized Vacuum Chuck 0:03:14

Customized Vacuum Chuck

DIY Vacuum Suction 0:00:53

DIY Vacuum Suction Clamps MKII 👌

Part of the 0:00:30

Part of the vacuum table project. See other posts for more details. It works!! 😀👍 #cnc #cncwood...

DIY Vacuum system 0:00:20

DIY Vacuum system (part1)

Vacuum table proof 0:00:15

Vacuum table proof of concept using window screen spline as a rubber gasket. #cnc #vacuum

Making a Vacuum 0:05:53

Making a Vacuum Fixture for the CNC | Part One

Simple Workholding & 0:05:49

Simple Workholding & 2-sided cuts - Making a CNC Vacuum Fixture

Комментарии
Автор

Nice Fixture! Thanks for sharing.
I made a vacuum fixture for a ShopBot Router that I used to own. Made a bunch of LED edge lit signs which are really neat. LED's come in different colors and some with multiple colors that can alternate i.e. FLASH.
Most of them were 11" tall X 13" wide which were nice for office desks or night lights; I did make one for a guys ManCave that was 24" tall X 36" wide. My original ones were cut with a V Bit but ended up going to a spring loaded carbide engraving tool from Tormach to just scratch the surface which turned out a lot better. Also when running the program with the spring loaded tool the spindle rpm was set to ZERO as no rotation was required.
I used mostly clear 1/4" plexiglas but on some of them I used mirrored plexiglas and cut them on the back side reversing the artwork so that they would show correctly from the front side. The mirrored ones were especially useful when I added a clock to the artwork as the mirrored surface hid the clock mechanism from the front view.
You could even add one to your beautiful machine if desired as the LED strips run from a 12 volt DC from 110 volt AC wall wart. You can even run them from a 9 volt DC battery or a 12 Volt DC battery for display where no AC power is available. i.e. Car Shows etc.
John

helicopterjohns
visit shbcf.ru