ARCTIC Freezer 7 X/7 X CO – Installation on Intel 115X

Freezer 7X / 7X CO – Intel Installation

00:01 Freezer 7 X/7 X CO on Intel 115X
00:04 In the box
00:09 Intel 115X installation
00:23 Freezer 7 X/7 X CO installation
00:25 What you need
01:21 Outro

• Compatible with Intel® & AMD® sockets
• Pre-applied MX-2 thermal paste
• Extended lifespan thanks to low coil temperature
• Lower power consumption and less vibration with new motor technology
• Offset heat pipes ensure optimal heat dissipation

A Worthy Freezer 7 Pro Successor: Better Price, Better Performance
The Freezer 7X benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, we have been able to significantly improve the Freezer 7X’s cooling performance.

Compatible with Intel & AMD Sockets
The Freezer 7X is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.

Pre-applied MX-2 Thermal Paste
Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

Longer Lifespan thanks to ist Low Coil Temperature
In theory, reducing the coil temperature by 10 °C can double the service life. With the use of new ARCTIC fan motors, we were able to lower the temperature by 20 °C, which quadrupled the lifespan oft he fans.

Offset Heat Pipes enable Optimal Heat Dissipation
The direct-touch heat pipes attached tot he Freezer 7X and an optimized design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-fan for Increased Performance
Inspired by the P-series, the Freezer 7 X’s fan benefits from all of the advantages of P-fans:
- High static pressure for increased cooling performance
- Broad RPM range
- Lower power consumption
- Less vibration
- PWM for synchronous fan control
For additional information about the P-fans, we recommend our FAQ.

Fluid Dynamic Bearing
Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.

Direct Touch Heatpipes
The Freezer 7X uses direct-touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

Double Ball Bearing constructed for Continuous Operation (CO version)
Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.

More information:

Buy on Amazon:

Find us on

[mikeymikey]

Love your products, avid user for 8+ years, never let me down once! Next build is with the beast that is the Liquid Freezer II 240 <3

[markodimic]

Just got this few days ago to replace intel stock cooler. So good. Max 58C load for now. No throttling, less frame rate drops. Great product.

[CastyAnimations]

Got this cooler to replace my stock one, Great Cooler!

[nbiller]

Just installed one today, and it was sooo easy!
(i5 11400f) Clever mounting, and blower is very quiet. Even on full load in Cinebench, it's holding a steady temperature of 57 C°
Best cooler so far!! Thx!

[md]

Very good product, but please include a notice on how some motherboards have a backplate for a screw in stock cooler, because the retention ring doesn’t fit in with the backplate on. i didn’t know that and i was about to return the cooler before i found out theres a backplate, otherwise it’s a very good cooler, and at a very affordable price too! The part where you have to hook the cooler on the retention ring is a bit difficult if the motherboard is in the case, but after you get that in and screw it in place, the cooler is secured very well on the motherboard. This cooler made my pc way quieter and the temperatures dropped noticeably. I would definitely recommend it to anyone who’s looking for an affordable air cooler!

Arctic makes the best coolers nothing flashy like rgb but videos on how to install this cooler is very helpful im definitely getting this cooler

[Adrian-qm]

I got that cooler on my i5 11400 and it s amazing xD

[lukase.]

You have realy cool and good cooling devices im surprised how cheap a good CPU Fan can be wow 👍

[MrHuge-dtyt]

Bro i love this cooler so much man 10000/10

[D]

Finally upgrading after over a year with the stock intel cooler L

[BroRabbit]

I bought MX-4 thermal grease and found out about lucky draw. And now I find out that in my country I can’t even get a chance to participate, not to mention the victory. Many thanks.

[minokapala]

Found problem with other users of this product.. When fan rpms are around 850 it will make resonating sound, the plastic cover vibrating against aluminium cooler...
How to Fix: Set minimum RPMS 900 or 1000 in bios or program

[guillaumebergeron]

super video je voudrez savoir pour mettre un ryzen 7 5800x il peut refroidire a combien de degree mericie votre reponse

[morromeyer]

Hi Arctic, just bought this fan and a 5pk of P14 PWM PST, and am very happy with them. Can you recommend a CPU FAN CURVE for the Freezer 7 X? What works well for a "normal" gaming midi tower? I realize that it is very hard to answer this question definitively, but a starting point from which I could experiment would be very much appreciated! Thank you

[AceyDesu]

This cooler looks fantastic. I'm thinking of getting this for a build with an u5 10400. Does it do a good job on heat dissipation?

[churner]

Hey I cant really tell if the pre applied thermal paste is better than my corsair xtm50 what is better?

[Azarilh]

For a few more bucks you can get the A13 X which is the same with three copper tubes.

[friedrice]

The bracket i got is square and not round like yours. 1 star.

[videodinosaur]

How do I uninstall to put in a different case I can't get the plugs for the retention ring to come out

[victorguzman]

Which way does the air flow ? Forward or backward from the aluminum fins