Honda Element P2647 Code Fix!

Thought this might help someone out there so went ahead and uploaded it. This is on an 03 Honda Element.

With this code it was unable to go past ~3000 rpm as demonstrated in the video.

After the fix it drives fine.

Sensor:

Gasket:

You can also replace the entire assembly.

Saving both time and money.

[randyzeroth]

Thank you so much. I got the whole assembly just in case. I don't want to have to come back and change anything else later. God bless you sir for your great video.

[johnjbrowniv]

I John Brown have to thank you bro, I just finished changing the screen on the Rocker arm controller and all my problems went away, all the codes ext. You were a great part of this resolve total repair $9.89

[tootybug]

I use my element to deliver mail, and this video has saved my sanity. Thank you so so so much!!!@

[joycehumphrey]

Thanks! The onliest thing I didn’t like was you showing and referring to your bolt hole.

[CallanChristensen]

I had this same code. Ended up being that the plug connectors between the harness and the oil pressure switch were corroded. I sprayed CRC 5103 Quick Dry Electronic Cleaner on both the connector (female) and oil pressure switch (male) connectors and then gently but firmly inserted/removed the connection to scrape off the corrosion. I did this 3-4 times, then wiped any residue, sprayed and went again. It didn't take that much time. I tried using a few tools to clean the male/female connections but inserting/removing the connectors ended up being the easiest. At some point in the past, the harness connector's locking tab was broken off, so I think this was allowing water/moisture to get into the connection.

[SaycoPworrell]

Man... I replaced the whole VTEC solenoid, VTCC, new screens on the front, oil pressure switch... And new connector... Still having the same issue.

[Marc.H.]

My fathers Accord CM1 from 2003. Same Problem. Fixed Same as you... it works . Thanks

[bluidog]

I’m in my second VTEC oil solenoid in 4 months. Both done by mechanics. I’m going to check the code at auto zone and try these parts myself. 2004 element.

[bogmasher]

I would suggest cleaning out the whole solenoid once out the car with some carb cleaner. Replaced mine completely with a Honda official part including the switch about 5 months ago and today engine light is back with same error.... grrrr

[TheThirdeYe]

This code just appeared on my 07 Accord. I haven't had any acceleration issues, but rather my idle has been a bit rougher than usual, and it did act like it was misfiring and bucking when coming to a stop once, with a flashing check engine light. Going to change the spark plugs, then try this as well. I just ordered the entire vtec solenoid assembly. Hopefully it fixes the issue!

[johnjbrowniv]

Thank you this is exactly what's happening to mine

[maanman]

Have you replaced your motor mounts since then? I've had this problem for a while combined with bad motor mounts and just recently discovered that one of the bad motor mounts has broken my transmission case, I think as a result of the bucking

[jeremyhende]

Newbie question:

Why replace just the gasket and sensor?
Wouldn't it have cost about the same to just replace the whole assembly since it would come with both included?

I have the same code on my 2003 and was going to do the same repair.

[metalguyn]

You forgot to change the o ring for the sensor. Any update on this? Did the problem reappear?

[gagekerschbaum]

Man i need some help. My VTEC solenoid was leaking oil bad, finally got around to replacing it. Took it out for a ride and now I'm having the same bumping issue at 3000 rpms, any ideas what it could be? Brand new solenoid/valve assembly. I've looked around everywhere trying to find info, but all I get is "replace the valve". Over the last month I've spent probably 50 hours replacing parts all over my car, mostly suspension, was so ready to have all the new parts put on and now I'm stuck with this

[sophisanroman]

This helped! I'm gonna try to fix it and see if that's the solution. It all started with an oil change... I'm wondering if the dude that did my oil change messed up with something. My oil filter might just be dirty? Idk... I'm just learning...

[SDCAScorpion]

Do you know if this same pet would work on a Acura rsx motor I want to say it would since I believe it’s the same motor

[Jay_Hova]

I had my vtec solenoid replaced like 5 years ago and now the code came back and it's hesitating again wtf

[cameronciviello]

I have same problem, but i replaced the whole solenoid and its still throwing the same code. I delete it and it comes right back on. Connections are tight and oil is fresh and i cleaned the oil screen on front of block, what do i do?

[lazaroesco]

I had this code just pop up. Thank you for the video. How long did it take to do this yourself. I’m pretty handy and savvy but want a realistic time frame. It’s dead winter here in Boston.