How to anchor metal shed

Do you know how to anchor a metal shed the the slabs or concrete base?
Sheds should be anchored to the earth or the proper base, such as cement slabs or concrete base. One of the main reasons for this is that a strong gust of wind could knock your shed off its foundation. This will result in substantial damage that is expensive to restore.
Securing the shed is a very quick an easy job so it's definately worth considering.

-----------------------------------------------------------------------------------
___________________________________________________

I'd love to hear your thoughts. Please comment, like and let me know what you'd like to see next.

Subscribe for the latest videos

[felixrichardson]

Priceless, red plug and gold screw, If you do this id keep a keen eye on the screws because they could rust out pretty quick if they get wet, the sealant will mean that the bottom of the shed and screw are more likely to stay wet rather than dry out. Alternatively don’t use such feeble fixings or use stainless screws, that shed should be lasting you a fair few years, i would want the fixings holding the shed down to outlast the shed.

[rd]

I'd use exterior 'L' anchor bolts drilled from below the pads through the shed floor at each corner and at mid points.

[Z-Ack]

I did this, clamped it real good to the frame underneath.. use jed clampits. But after a good storm it just took everythibg and left the clamps screwed in the floor.. whole shed ended up on top of a hay barn a few doors down.. i let them keep it..

[MyLove-sr]

Shows clapping into a board, not sure that will do. Our winds get very high.

[erval]

Really great video but why did you use regular small plastic drywall anchors? Maybe they will work but I don’t think it will hold for long. I was hoping to see what kind of concrete anchors you can use on a metal shed

[Josh_D]

I built a 10 x8 planning to put it on a wood floor. Whats the best way to tie that to the ground? Now to this kinda construction so any ideas appreciated

[johnhenderson]

Hoping you can help, I've just received a similar Yardmaster shed which I was going to install on pre-laid heavy concrete pavers. What I didn't realise when laying the pavers was that a damp proof membrane needs to go below the pavers to prevent condensation in a metal shed (apparently concrete pavers soak up moisture from beneath and then into the atmosphere above). Have you installed a DPM beneath your base? If not, have you had any issues with condensation? Thanks

[wingate]

Did the sealant keep out the rain in the end ?

[wallacelawson]

Are those screws just for concrete or can I use them for my 10x8 arrow storage shed built on 2x6's and 3/4 inch plywood. If yes can you share a link to where I can purchase them, thanks for the

[codykehrt]

Do you happen to have a description of the screws and washer you used? Thanks for the video

[Z-Ack]

You can pull out any plastic anchor by hand.. either use a tapcon screw, a proper butterfly wall clamp or a helix style anchor.. would never use those kind of plastic anchors..

[jaimesalas]

He's using the wrong type of screws make sure you use the correct ones that do not rust