UCCNC Reference to current probe routine using a M6 macro

preview_player
Показать описание

  1. Tomahawk CNC
Рекомендации по теме
UCCNC Reference to 0:15:50

UCCNC Reference to current probe routine using a M6 macro

M6 Probe macro 0:04:12

M6 Probe macro UCCNC

Tool length probe 0:00:56

Tool length probe cycle in uccnc

UCCNC probing issue 0:03:39

UCCNC probing issue

UCCNC Probe 0:00:11

UCCNC Probe

Tramming Vice using 0:02:40

Tramming Vice using UCCNC probing funtions

Uccnc probing help 0:00:49

Uccnc probing help

i2R CNC - 0:04:39

i2R CNC - How to use the Automatic Touch Probe on UCCNC

Probing test 0:03:10

Probing test

Squaring Tomahawk CNC 0:04:50

Squaring Tomahawk CNC with UCCNC

ProbeIt for UCCNC 0:04:03

ProbeIt for UCCNC - porting routines to plugin

UCCNC button save 0:03:54

UCCNC button save in new location

A quick test 0:02:00

A quick test of my new 3D probe using my probe screen and UCCNC

CNC Mill / 0:02:46

CNC Mill / Router #cnc #symbiosis #uccnc

UCCNC V1.2113 G93 0:00:31

UCCNC V1.2113 G93 Inverse time feed mode using Rotary A Axis

BNR Probe setup 0:21:16

BNR Probe setup in UCCNC

UCCNC Macro Button 0:02:06

UCCNC Macro Button Screen Setup

ProbeIt for UCCNC 0:05:36

ProbeIt for UCCNC 4th Axis Point Cloud Demo

UCCNC Demonstration Video, 0:25:49

UCCNC Demonstration Video, Rev0

Backside Chamfer UCCNC 0:00:32

Backside Chamfer UCCNC

UCCNC - Testing 0:01:13

UCCNC - Testing Sub Routines M98

UCCNC Zero Cycle 0:02:51

UCCNC Zero Cycle Time - Macro call to auto reset cycle timer.

UCCNC - Cheap 0:22:29

UCCNC - Cheap tool length probe

ProbeIt for UCCNC 0:18:59

ProbeIt for UCCNC - Probe Tip #6': Installation and Probe Calibration

Комментарии
Автор

Hi mister!
I hope you are well!
Subtitles are not available for this video, can you enable this feature? If so, then thank you very much!

claudedechamplain
Автор

Hi Daniel, I was dreaming about a solution to this issue as only have a ER11 collet holder a few nights ago as I've jus ordered a AXBB-E with UCCNC 🙂 I've registered on the forum but which macro did you use. Sorry if you have already answered this question P.S I don't want to join Facebook jus for this.

davidsomething
Автор

Thanks for video ….any chance on how to install Macro and edit for machine. Just received my Anxion and the learning curve is very steep. Cheers

lauriemattila
Автор

Please seating axe x, y, z end probe for normali use . Bogdan

medleymedley
Автор

Thanks for the video! I tried the same procedure, but to zero my z reference plane, I use a 5mm gage, but even if I put that value in the gauge height, when I reference the workpiece, the zero is 5mm above the reference plane... any advice?

cnchobby
Автор

Please help me with m6 macro for semi-automatic tool change. Thanks!!!

zncdmaker
Автор

what macro are you using ? could you share a link ? please man I'm desperate

nistax