ACC Advanced Programming: Decoders, Part 1

In this video, you'll learn how to set up and install decoders on an ACC commercial irrigation controller. The use of decoders with the ACC system allows for 99 stations to be run along up to 6 two-wire paths. Learn how to program a station decoder, set up a decoder as a pump or master valve output, as well as test the proper operation of your decoder system. Additionally, you will learn how to view decoder configurations and display ADM alarms.

Subscribe to our Facebook and YouTube page to see other videos and to be part of future promotions!

[SailR]

Remember, on multi-station decoders, you assign station number to first station and the program will automatically assign sequential station numbers to remaining stations on the decoder.
For example..when u program a 2-station decoder, maybe you assign station number 4 to first station then the program will automatically assign station 5 to the other remaining devoder station. For a 6-station decoder if you assign the first station as #10 then the program will automatically assign the remaining stations as 11, 12, 13, 14 and 15 👍

[fpplsoftwashpressurewashin]

I would recommend twisting your wires together prior to insertion into the wire nut. This is a much better connection.

[ariomich]

Good controllers, easy to work with it.

[Josesal]

Hello there,
What about when the controller it’s showing a attention alarm msg
What can I do to troubleshoot this problem I am not very familiar with this unit

[conanbrown]

what do you do after plugging decoder into the ports and decoder is not found?

[GalaXy]

what if not connecting to the computer station?

[pedrobalderas]

tengo un contro Hunter Acc aunque este apagado se prenden barias estaciones algien me podria desir cual es el problema

[WaterDesignirrigation]

This isn't going to work for Hunter. Most techs, I am one for 27 years, none of my workers could handle this. Job is hard labor and not cut out for guys that can handle this stuff.