SawStop Jobsite Saw PRO Review - Years Later

Good morning everyone, We’ve been using the SawStop job site pro for a little more than two years. In this video, Jeff gives a thorough tour of the SAW and points out some of the saw's unique features.
Thanks for watching, Jon

[williamellis]

Great review, Jeff. It's nice to hear from someone who has actually used a piece of equipment instead of receiving it and just going over features.
Bill

[chrisgardner]

It's like we're having a conversation! You're turning that nob on the fence and I'm saying to myself "what does that do?" and 2 seconds later you say "to be honest I don't know what this does " Almost fell out my chair.

[AB-nuwe]

I've got that saw for my small garage shop. Had it for about the same time you've had yours. Works great. Love it.

[tom]

Thanks guys. Informative and enjoyable!

[awozniew]

We use that as our job site saw and I didn’t realize that support wing was integrated into the fence.. we’ve done so many dumb work arounds up until this point… thank you!

[Caymen]

To prevent the fence from moving when you’re locking it down, slightly pull it forward as you’re locking it down.

[jimserhant]

Saturday Morning Coffee with Today’s Craftsmen. Another educational video, thanks, guys!

[sapelesteve]

Very informative Jeff & that looks like a really nice portable table saw! 👍👍

[ed-gwov]

I’ve had my SawStop job site table saw for about a year. I love it, changing out the blades for a dado stack is easy. Changing out the cartridges is also quick and easy. You can dial in the angle if you use a digital angle gauge with the knob on the far right of the saw it has plus & minus you can fine tune the angle.

[coreytighe]

That saw was a joy to use at Makers Camp last year ripping all that walnut down. Someday I’ll upgrade the Dewalt jobsite saw to this one.

[redscortgt]

Is Rob still doing the podcast? If he’s not I’m gonna miss his laugh. lol I started the podcast from the beginning a few weeks ago. Glad to see it’s back.

[AlexRicketson]

Have you had any issues with rip fence accuracy? I'm used to a rack and pinion fence and I'm skeptical on that style of fence staying parallel to the blade.

[tereg]

Question: Does your tablesaw, have a lot of slop when locking down the fence. Mine does and I've seen on Reddit that some other folks also have issues with the fence staying in place because the right wing doesn't fully lock. I have about 1/16 of play when the right wing is locked. Any suggestions if you are experiencing this issue?

[danyodice]

It's very similar to the Ridgid job site saw minus the flesh sensing tech...🤘🤘🤘

[Hatchmade]

It looks like it has a big enough arbour to put a dado stack on that. Have you ever used one in there?

[AdasUnck]

hello, how do I contact u? I didnt see your info