The Fastest & Easiest Way to Install Cabinet Handles

I'll show you the fastest and easiest way to install cabinet handles by building a 5 minute jig in order to quickly install all the hardware for your kitchen's doors and drawers. I also make the jig reversible and fool proof so there's no mistakes when drilling your cabinet doors. If you have watched any of my IKEA kitchen series then this video is helpful in finishing the kitchen off.

0:00 Intro
0:45 Positioning Handles
1:26 Building A Jig For Cabinet Doors
4:05 Building A Jig For Drawer Pulls

**************************************

➤FOLLOW US on Social Media:

➤Watkins ICF Hangers
USE PROMO CODE - UPTOKODE2020 and receive 10% Discount when ordering

[jojokocan]

I have been following you along our IKEA kitchen build! We seriously couldn’t have done it without your tips and tricks. Thanks so much for sharing all your skills and talents with the public! Marriages have been saved in renovations because of it 😉

[joeram]

Brother, I can not stress how valuable you've been to me these past few days. I installed my first IKEA kitchen without a glitch. I viewed your entire series on the install and all other vids on tips and tricks and I have to say, if it wasn't for you, I would be stressing and delayed trying to figure this whole thing out. I'm just wrapping up the install and it has come out beautifully. I'm very impressed of the IKEA quality.
I do appreciate you taking the time to carefully explain every detail and get this information out. I'm a lifelong fan of yours now!

[TANVEARKHALIQ]

Watched lots of videos for the best tip and came across yours. has to be the best out there. Ended up fitting like a pro. Thank you for making it so easy and straightforward. 👍

[slavzabicki]

You are a god of Ikea kitchen cabinets. Hands down. Greetings from Ontario

[hullzy]

Nice and simple instruction, thank you very much! Will be checking out your other videos. I'm a simple DIYer who gets in over my head with great frequency so I appreciate an easy to follow video

[grahamjones]

Made mine from cardboard, worked great! I stapled bits of scrap wood for the stops

[conflap]

Thanks Kody mama's new kitchen drawers look great.

[skygh]

Pro tip: put a piece of masking tape at center of drawer then use a fine sharpy to mark the center. I install builders hardware almost every day

[austinpatrick]

The doors only jig could be improved by putting another stop to catch against the bottom of the door instead of having to manually hold it flush. It would still be usable for left and right hand doors as well because you could just flip it over.

[RighttothePointDIY]

Very good video. Thanks for the clear explanation

[lisakelley]

That was excellent! My sis and I retired together... we're building from the ground up. Right now I'm working on kitchen cabinets. I really don't want to drive an hour each way to the nearest building supply store to buy a plastic jig for door and drawer hardware installation. This grandma DIY-er thanks you!

[slavzabicki]

Also it makes sense to get a ready to go jig from amazon or ebay. Costs pennies and you can always reuse it

[Goatsmilkuk]

Did this today, worked perfectly and saved a lot of time. Thanks for sharing.

[ooke]

I was curious about putting some handles on our bedroom drawers and this is the best DIY gig I’ve seen & it worked seamlessly!
Great work Kody & thanks for sharing!

[joekunkel]

Nice. Super practical! I can use this.

[m.a.]

Awesome tip man, I have a bit of dexterity issues so I added a piece under it so I can apply upward pressure vs holding it flush. But definitely could not have done it with you. Ty

[neil]

Great tips. I'll put them to use soon on installing my bathroom pulls. Thanks/

[jumpj]

did you drill the holes on your drill press to make sure they are perpendicular?

[gerry]

Any advice on how to properly size pull lengths with different height or width cabinets ?
Thanks, Gerry from San Diego, CA

[grahameviner]

perfect just what i needed thanks buddy