Creality CR-10 Smart - 3D Printer - Unbox & Setup

Intelligent Auto-leveling:
The CR-10 Smart is equipped with the V2.0 upgraded automatic leveling system. After your first automatic leveling, you can start printing immediately, no more manual tedious leveling work.

Ultra-silent Design: Self-developed 32-bit patented mute motherboard, low-noise power supply, and highly efficient cooling fans ensure a silent 3D printing experience.

Built-in WIFI Function: CR-10 Smart supports both WIFI & RJ45 wired network connection. With the Creality Cloud APP, you can easily slice 3D models, remote control your printers, and print an object whenever and wherever with your phone.

Screen Protection & Auto-shutdown: CR-10 Smart will auto shutdown after the model is completed to save power and effort. And it also supports auto feeding and retreating filament which makes the process easier.

Dual Z Axes+Dual Diagonal Drawbars: It adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and makes CR-10 Smart more Likely to print out with high accuracy prints.

As an Amazon Associate I earn from qualifying purchases

[zealous_fervor]

This has been an enormous help! I just got this printer, no experience with 3D printers prior. Literally just set up mine as I watched you do the same. Thanks so much!

[hughandcry]

Very helpful. Am setting one up right now.
But I will add 2 point.
When installing the reel holder, you can disconnect the mount from the arm, attache the mount, then bolt the arm back on. Much easier.
Second, and most important, try powering it on before attaching the gantry. If it powers on, all good, proceed. If it doesn't, gently flip it over and remove bottom plate (watch out for the fan wire attaching the plate to the circuit board.
Check the side of the power supply for a recessed red switch. Make sure it is showing either 230 or 110 (maybe it was 115), which ever corresponds to your region.
I spent half a day using a voltmeter to test various connections, fuses and wires before I found reference to this.

[joexaeraven]

this is my go-to channel if I want to know anything about 3d printers.

[ahmadpourjavadi]

Thank you. That was a very clear guide/instruction on how to change a filament on Creality CR-10!

[autisticChronicles]

In order to disable power loss recovery for the printer, you must insert the following code at the top of the start gcode in machine settings (CURA): m413 s0
(Obviously if the power goes out, your print will automatically fail without being able to recover).

I also like using this gcode: m300 p200 s440 (play tone) only works for certain printers. I know it works for Ender 3 Pro (very loud), Ender 3 V2 (too quiet), and CR-10 V2. For me it seems to only work on the printers with the blue LCD screen. I use it to let me know when my print starts and ends.

[techsavvyhero]

Great in-depth setup and review of this printer. Watched in its entirety. Well done Vlad! Keep 'em comin.

[markmcd]

I had to come back and watch this again - I saw Teaching Tech's video and that almost scared me off getting this printer. :D Your printer seems much more friendly.

[franklinandesther]

honestly the only cr 10 smart review anyone needs to watch (edit: typo)

[DPrintSOS]

Ive been unboxing a bunch of printers lately but this specifically looks a hair higher quality than normal. Love the bed mount! Nice one Creality!

[dxage]

@39:32 Start G-Code should not be changed from E5000.00 to E500. The image provided with the printers manual is cropped and refers only to "home" part, not to the rest of the code.

[muhammadnaveedsaeed]

Very good detailed video on setting up printer. Helped me to help me setup my 1st printer and print 1st 3D object

[ripstop]

I've been printing with the protective layer on... Thank you for this

[grasu]

Mine is arriving tomorrow can't wait 😊

[kyndred-rymm]

thx man , great job of explaining everything for a noob like me this is gold

[maxdragon]

You have the spool holder on the wrong side of the mounting bracket. That's why you can't turn the holder all the way to the back.

[TheDevnul]

I used a machinist square to make sure the gantry is at 90.

Another thing I’ve seen you do in the past is make sure the X screws are at the same point.
But I guess with the auto leveling it does not matter.

Another good review.

[moonobservergilles]

this model i like probably will be my choice good size projects checked auto leveling cheked, good control screen checked. Now i will wait and see a good price sale and will perchase this model. Nice review. thanks for sharing

[veelink]

The nozzle expands the most and should be hot for leveling BTW

[gratefulamateur]

This was sooo helpful. The instructions not so much! Thank you!

[AugmentedPixel]

Can’t unhear how much he says “so” lol