3 Link Suspension is ALMOST COMPLETE!

Today we put real links in the 1UZ 1989 Toyota Pickup 3 link solid axle swap project! Tackle the axle side panhard bar and encounter a whole new issue!

Music Licensed @ Artlist

[LuckyWill]

Glad to see you're using actual CAD to cut with the Arch-Droid, Your time with GrindHard definitely worked out. Keep up the good work, your inspiring us all to get out there and try doing more fab work!

[nulcable]

Under rated channel. Always look forward to your content. Keep up the great work!

[FlawedOffroad]

assuming its out so far on driver side to make equal length as the drag link? Id consider getting a scrap of 3-4" tube with thick wall, notch the frame to match and weld in a half moon to plate it. and it gives a little channel for the tracbar to clear. Sorry "panhard" haha. killer progress

[mikejensen-fogt]

awesome work man! its looking great 😍
one idea to get around the frame would be to stick a small bend in the pan-hard bar where it would hit the frame. that way you still get the center-to-center pivot geometry that your looking for but the actual bar will clear the frame.

[TheTreadLife_]

I drilled and flipped my hi steer arms since they didn’t need to clear leaves anymore. Made the angles much easier to hit. Packing it all up front was a bear!

[analogx]

makin progress :) this is coming along quite nicely

[TheTreadLife_]

I also fully boxed my frame side track bar mount. The first one ripped off. I would definitely suggest it. I can send you some pics if you need

[LouisianaMechanic]

Looking great man. Thanks for the content!

[Gentlemenrebel]

What heim joints did you end up using? Brand/size?

[dannyswayze]

Hah! I saw you looking for a drop pitman on BCToy4wd, now I know what that was for 😆

[danielmagalhaes]

Awesome work! But i got a question. Instead a 3 link and panhard bar. Why you don't use a reverse 4 link? So you don't have to use a panhard bar

[mikejensen-fogt]

killer deal on the shocks man! I paid more for the set of new 12" Bilstein 5125's that are on my truck right now lol...

[royallplatnum]

How can I learn this kind of retro work

[Mike_Allegro]

Can't you make a pan hard bracket that drops it down a bit lower?

[DurtySailor]

That DG looks alot like DG performance logo

[АндрейЛевин-оь]

What car did you install the front axle from? And the rear axle is still original or also from another car?

[dreamassassin]

notch your frame where the panhard bar hits. then just reinforce the frame in that area