How to reduce boiler pressure. 2 methods

EASILY fix HIGH boiler pressure yourself. Reduce boiler pressure DIY. Maybe you accidentally topped up too much? Make sure the filling loop is closed and switch off, so the water isn't continuously topping up.

How to identify high and low boiler pressure
Simple DIY fixes to get the pressure just right

How to reduce #boiler #pressure low pressure plumber Pressure too #high on boiler Boiler pressure too low repressurise boiler how to repressurise a boiler high water pressure noise low water pressure water pressure gauge plumbing #red pressure gauge topup

[AmyWinehouseand.]

Sunday evening and pressure went right up to 3.8...now thanks to this it's down to normal again.Thanks for the upload I have survived.

[horatiuavram]

My boiler randomly went to 4 bar this helped a lot

[robertelliott]

This is very useful information. I found it easier to bleed some of the radiators until the pressure dropped.

[jfwberg]

This was very useful thanks, my blood pressure is also back to normal 🎉

[Ray_J]

Mine was at red line. I did it as you instructed. It's OK now Thank you so much 😍😍

[NyashaChidzambwa]

Thanks bro really worked i work in a care home and it wad really cold for the people we support but after this video they were warm again 👍🏽👍🏽🙏

[ramapabathi]

This is very useful information thank you.

[johnm]

At 0:01 the pressure of 2.0 bar is almost exactly in the middle of the acceptable range (shown as 0.8 to 3.0 bar, so the average is 1.9 bar).

[scottcameron-baker]

Thanks for video, it's helped me a lot, my boiler pressure went to 4 bar this week, I don't know why though cause it's only been used for hot water for months and no heating been on at all 🤷‍♂️

[NC-mkvr]

How much water do you bleed from each radiator? All of it until it stops?

[adammalik]

Does the heating need to be on first before draining the water from the radiators or not? Thanks

[gusy]

Thank you Sir. Was that hot water coming out?

[chulbulpandey]

My combi boiler pressure is fine for hot water but when i put heating on it goes in red pass 3. Why does that happen? Help please

[jesvinjaimon]

the boiler was at 3.8 bars and i’ve brought it down to 2.2 but it doesn’t go any lower than that, not much water is coming out the hose(i connected it to the hose and then put the hose outisde) and then i got a f75. can you help me please

[horbow]

what to do if without heating I have 0.8 and when I turn on the heating it goes to over 3 bar

[gmonkey]

I just took ten litres out of the system and its not moved down

[edthelasttribe]

I will use my, coffee ☕️ cup, you wouldn’t tell the difference, if it gets discoloured water 😂😂😂😂😂😂

[jayjohal]

OR YOU CAN DO IT VIA YOUR MAGNETIC FILTER

[boomer]

I changed the expansion tank and the relief valve plus the input water regulator and I am have the same problem with blowing the relief valve 😂 Can any one help me?

[classock]

Thank you. Kept it simple to understand