How To Install An 'IKEA BEHJALPLIG' Sliding Hinge On Bosch, Neff or Siemens Integrated Dishwasher

In this video i show how to install the IKEA Behjalplig sliding hinge on an integrated dishwasher. If you have a kitchen with large furniture doors, then this video can help to put a door on your dishwasher with the step by step instructions.

[DIYHelper]

Thank you, without your video I probably would never know about this system. Saved me from a lot of problems. Update : I had 145 mm distance from the bottom for a Bosch dishwasher and that is not mentioned in the manual. I used the 135 mm holes and everything is fine.

[Andy-qkbl]

Sensational video!

Tip for those who like me have a taller than A point on the little metal measuring thing (ABC..), just make sure your dishwasher is as flush as possible with the countertop and use the highest possible option ("A" in this case), even if your measurement is higher.

Worked for me with a Beko dishwasher that was +22mm higher.

[MichelBouman]

3 years later this video still rescued me from a 12 round fight with Behjalplig! Thank you

[aleterra]

I had this device installed by a third party company, they did an awful job. I realized today that they installed the large plastic piece out of track, they never read the instructions. I managed to disassembly it and do it correctly thanks to your video! thank you so much!

[StefanKRV]

Thank you good sir! You really helped me get this done. The original handyman that installed it had done such a poor job that the door kept falling every now and then until I had to completely change the mechanism. Your video gave me the confidence that I can manage it. And I did :). Thank you again for taking the time and putting this together! Cheers from Bulgaria.

[sylviaparker]

Awesome video, gives you so much more confidence than the printed instructions. I just installed this with a Bosch series 4 replacing the Ikea dishwasher that died in our Ikea kitchen. Extra tips would be to emphasize that you need to install the dishwasher 1-2cm deeper when using this as it is a extra layer between the panel and the dishwasher, and also clearer directions on the last step with the two white clips to prevent the door from popping out of the clips on the installed bar at the bottom. Total lifesaver video. Thanks so much!

[Firebird]

The staff at my ikea didn't know it existed. Even though they had 140 in stock.
Recommended an alternative of €110 from another reseller.
During the kitchen planning nobody mentioned anything about this problem. They only put 'old dishwasher at consumers own risk' in the order confirmation.
After I searched the Internet I found out about the sliding hinge.
After seeing your video I found the behalpjig hinge at the ikea.
Had to Google it because I couldn't find it on the ikea site.
Thanks a lot for saving me €60 and making it easy to install.

[guypalmer]

I was a bit of a loss reading the instructions until I came across this video. Brilliant. Thank you.

[johnhanley]

Fair play. The IKEA instructions on this one were not up to scratch in my opinion. So thanks for the help, don’t think I would have sorted it otherwise for my 450.

[eastie]

ikea support told me there was no other solution other than to cut the door down to 720mm to fit a hotpoint dishwasher. Only by luck I came across thr behjalplig hinge, great that a video exists and saves the hour you need to fathom out their awful instruction sheet, thank you

[nicholakerr]

Thank you for this video!! We've just used it to install our new Bosch dishwasher. The Behjalplig is a slightly different shape now and it didn't line up with the dishwasher door screws, but we just drilled new holes into the Behjalplig panels and it's worked fine. As below, our dishwasher was also approx 145mm at the bottom but the 135mm holes have worked fine. Thanks again.

[MichalSingr]

You really helped me man... I spent a few days installing a new Ikea kitchen and than almost the same amount of the time installing this "PÄRAPLÖGICK" evil Martian mechanism... This video really helped me understand what's going on.

[beepboopmachines]

Thank you sir! I just had my kitchen installed without the dishwasher door. I used Samsung's instructions only to realise that the 80 cm Ikea door just wouldn't work. Now I know that I have a solution. Have a great one!

[joannaszwajgier]

we are so grateful for this video! Where we live, we were not able to find any professional that would know how to install an integrated non-Ikea dishwasher into an Ikea kitchen and your video is a step-by-step guide. You saved us stress and some money - thank you!

[iyzy]

My kitchen is from IKEA and my Dishwasher is Bosch. This video has made me aware of this product and showed me how to fit it in. Thanks very much

[BrianBurden-eybc]

Best installation video I've seen saved a lot of brain ache. I'm trying it on 45cm machine into a 60cm space, fingers crossed.

[jbilan]

Thanks a ton for this video, you saved me from panic from looking at Ikea guide. All went well with following you. Greetings from PL.

[stevenbarrett]

So finally plucked up the courage to fit the door slider, using your video it was quite an easy task ! The door woods were a slightly different shape but I guess a couple of years has passed since your video was shot apart from that it was exactly as you showed….quite chuffed, enjoy the coffee !

[danijelabalas]

This was very helpfull and very clear. I haven't even look at the manual, I just watched what you did and copy-pasted it.

[MarcoAlza]

Excellent video and thank you. Was a pleasure to fit this product and I would have struggled without your concise and accurate instruction.