Accord Rear Hub Bearing

How to replace a honda rear hub bearing. Same thing for older civics and accords

[agentorangephotographyc]

Just did my 96"rear drum brake non-abs sedan" thankfully it went as easy as you showed. Thanks for the veideo. Rented socket for hub bolt from autozone for 83 bucks. Took 10 min total to jack car up, remove, and install, put back tire. Got the hub for 45. Diy success. note . I will have to replace the drum brake set and the cylinders because I noticed brake fluid

[Mreque]

This channel has got some potential, just promise me you will replace that leaky air hose.

[carroll]

I need to do mine. It is 2000 LX 2.3L 4 cyl. Well, it looks like you don't have to mess with the drum brakes! Don't have to take them off at all. Is this true? THEN.... I'm in luck!

[badassyuta]

what to do if the drum is rusted on there real tight? Even the threaded holes are rusted, not able to use bolts to push the drum out.... A good whack of a hammer can solve the problem?

[jcorral]

... I just had my rear hub bearing replaced on my 1999 Accord EX,
... and I've noticed something that many videos show that my mechanic didn't do and that is grease before putting the new Hub on.
... so my question is are you supposed to always grease b4 putting hub on, and since he didn't will that be a problem for me down the road?

[llgg]

Can you guys help me I have a set of rims that belonged to my 94 civic coupe si y want the same rims to be on my 2001 accord v6 hiw can I go abouts to do that it don't matter if I have to buy new hubs weels

[smileyrod]

can you guys do a vidieo a 2006 honda accord let me know thanks

[dreammerchant]

Thank you for showing how the front ones were a bitch Akeebono set up not Nissen style..but this rear is a swift job... was hopeing i didnt have to break dwn the whole brake assembly.. Thumbs up...

[MadDragon]

Yeah, don't try to bust that nut loose with a 1/4 inch wrench, you may end up with a puzzle inside your 32mm socket. ✌😂

[MiamiPartyboat]

Ur not going to toque that axel nut to specs?

[nazartolen]

Dealership quality work. Did not torque it to specs, well you can see how young he is. Doesn't have enough experience mechanic, good luck to the owner☹️

[lescap]

What Honda dealers charge and they dont even torque anything to spec lol. Good luck to the owner when they try to take the impact tightened lug nuts off.

[Nguyenfold]

Wish I could feel how dicked it was. Lmao