DJI Mavic 3 Disassembly and Repair: The Ultimate Step-by-Step Tutorial

In this comprehensive tutorial, we will walk you through the step-by-step process of disassembling and repairing your DJI Mavic 3 drone.
Buy tools and parts on AMAZON:

ALIEXPRESS:

FOLLOW ME:

Time code:
00:00 DJI Mavic 3 disassembly instructions
00:15 Screwdrivers for disassembling the Mavic 3 drone
00:46 Start of disassembly Mavic 3
02:41 How to open the drone body
06:33 Removing the top cover of the drone
07:13 Removing the fan
09:48 Removing the cooling heatsink
10:39 Removing the GPS module
12:46 Removing the panel with vision sensors
14:42 Removing the drone motherboard
16:59 Removing the gimbal camera
18:04 Removing the bottom cover of the drone body
18:39 Removing the bottom sensors of the drone
19:33 Repair or replace the drone motor control ESC board
20:08 Completely disassembled Mavic 3 drone into parts
20:24 Reassembly of the Mavic 3 drone
42:10 Drone check

*DESCRIPTION*
Welcome to the ultimate DJI Mavic 3 Disassembly and Repair guide! In this comprehensive tutorial, we will walk you through the step-by-step process of disassembling and repairing your DJI Mavic 3 drone.
Use this video instruction to disassemble the DJI Mavic 3 drone to replace the body parts of the quadcopter, replace the motherboard, GPS module, and vision sensors, or repair the ESC motor control board of the drone. To replace the ESC board or motors of the drone, you will need a soldering iron and some experience with it.
Whether you're a beginner or an experienced enthusiast, this guide is designed to help you unlock the secrets of maintaining and fixing your DJI Mavic 3. From troubleshooting common issues to replacing parts, we've got you covered. Join us on this exciting journey and take your drone repair skills to the next level!

* DISCLAIMER *
This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk. This video description and commentaries contains affiliate links, which means that if you click on one of the product links, I could receive a small commission.

* AFFILIATE PROGRAMM *

#howfixit #fix #djimavic3 #dji

[nyanlone]

Not negative comment, but you miss the most difficult component is changing new arms to remove the arm-shaft-spring-axis. There are four screws inside that must be removed using a 90-degree screwdriver.

[hectiicfinesse]

Ughhh the only thing you forgot was the legs. The legs are the most commonly damaged/replaced part

[RobPerreault]

This officially makes ya a legend, mate! Thanks for the tips. Now doing maintenance on my Mavic 3 Pro is no longer stressful. I am a fairly new owner but LONG time creator. This is Very appreciate good sir!

GREAT work!

\m/

[AlteradasTV]

Hello my friend, thanks for the video. But it's still missing how to change the middle shell. The plastic got hard because I use it most of the time in the sun, and when I opened the wings, the connection on the middle shell just got broken. Please help continuing the disassemble!

[AlteradasTV]

So, when I opened the front left motor arm, the middle shell just got broken... So, I have to order a middle frame, everything else on the drone is perfect, but I CAN'T find anywhere else how to disassemble all parts to replace the shell. Best regards and thanks!

[farhansaud]

we need a tutorial on mavic 3 pro please

[patrickr]

Very interesting. Maybe you have already opened the DJI Charging hub ? Is it screwed or with clips ?
Patrick

[VCBP-]

Only piece im seeking to replace is at 4:19 what tool do i need?

[billynunzcomedy]

How would I replace the front top sensor?

[renatodioses]

Hello, excellent video, one question, I replaced a visual sensor on my Mavic 3, but now I get "calibration error" how can I solve that?

[sbriguez_drone-qrje]

Tremendo trabajo gracias por compartir

[Kovaction]

How do you get the 4 screws out for each of the rear arms? I've tried with a 90°ratchet and can't do it. Ugh!!! What's the trick?

[NRVE]

Mine has a screw with a ball point on it for the body? Not sure how to take that off

[دحامنةسمير]

Hello
Can I disassemble mavic 2 with this video??

[makro]

hello, what processor is used in this drone and where can i read about it?

[podbicara]

Hello bro, 'am a new ur subscriber. A whole of urs vids are great! Keep it great, and hella pleased to found those channel. How a ultimate tutorial and perfect guide. Thanks

[BOB-oyhh]

Anyone have a video on only replacing the landing legs without having to disassemble the whole drone ...I'm sure less steps are needed then in this bideo

[Derp]

where can I find back replacement shells??

[andreenedino]

hello friend I have a mavic 3 classic and when I make an orbit movement it loses the horizon little by little, do you have any idea what it could be? I've done all possible calibrations on it

[achrafdrone]

Hello everybody, I’ve crashed my mavic 3 cine and wanted to know if I could repair it by myself or it needs to be fixed at dji official center ? Does it require any programming after replacing new parts . Thank you