DDR5 6000 vs. 8000 MHz RAM – AMD Ryzen 9 9950X

MERRY CHRISTMAS!!!!

🐶 🐱 🐭 🐹 🐰 🦊 You will find the items we review through the following affiliate links 🐻‍❄️ 🐨 🐯 🦁 🐮 🐷

🐥 Our Site 🐥

🐧 Follow us on Social Media! 🐧

🐼 SUBSCRIBE to Our Channels 🐼
#ddr #comparison #RAM
Music track: Chill Vibes by Pufino
Free Music Without Copyright (Safe)

[ATVFrith]

Quick and straight to the point while keeping it very technical.
No 30-min non-stop nonsense or ranting.
AWESOME

[jodea]

You are the best, video is just full to the point and no empty words. Thank you for providing us with such amazing content.

[micahwright]

Can I upvote this video twice, packed all the info people want into under 5 minutes.

[GameslordXY]

You are removing slides waaaay too fast.
I don't think many can keep up without constantly pushing pause and going back and forth understanding little.
No shame doing video couple of minutes longer.
Maybe 3.
Is the only significant thing I am bothered with on this channel.
So please, slow it down.
My guess is you push away more people than attract this way .

Sometimes slide remains acceptable amount of time, but more than sometimes you keep changing them every second or so.

[JimCKD]

Merry XMas! Thumbs up for the XMas RAM vid!

[MikeBob]

Thanks, Aris. 👍🏼

I'm riding DDR5-6000 until the wheels _fall off!_ 😁

[EricTheBroBean]

This is such a underrated channel, so simple and straight to the point.

[Emmanuel-wbgt]

The benchmarks in conora render indicates almost a 30% of improvment when a 8000mhz ram its used instead of a 5800mhz.

[neoxetroc]

Super succinct and much appreciated. While I'd like to hear a bit on stepping and CAS latency, I don't think it would contribute as much as the speed. You broke this down super easily, gave your opinion, and mic dropped. Chef's Kiss.
While the slides of the graphs were quick you also did state that they were available. Mentioned where and included a link in the description. If I'm being honest those graphs I need to pause on every video since I get confused easily trying to read them anyway. 😅

[ChrisHillASMR]

I mean, 5% increase on EVERY application would justify an added cost. usually these components are specific to applications and its just such a toss up with price vs performance and its intended use case but at least here, you get what you pay for, increased productivity.

[benuten]

Intel recommends at least 8400MT's for ARL, I run daily 8600MT's on a Z790 platform and its Night and day on Gaming, I had my secondary and tertiary timings tweaked. You also need NGU and D2D clocks overclocked to see the benefits.

For AM5 you need a higher FClock to see notable benefits for 8K MT's if aiming for anything 2:1..

[Darkeheh]

THANKS MALAKA! STILL GOING WITH THE DDR5-8000 in my 9800X3D build because it's going to be another 5+ year build for me and my wife!

[KarazP]

I'm choosing between trident z5 neo 64/6000 and Royal neo 48/8000 and the price difference is about 30-40 usd. But personally, I preferred the royal neo appearance 😢

[thomask]

When comparing ram speeds you need to show the 1% and .1% lows as well. Otherwise its not really showing much. After getting past a treshhold that for ryzen is around 6000mhz, faster ram typically improves the lows and not the average by a meaningfull way.

[julius]

LTT would’ve made this into a 30 minute video

[MoireFly]

I like the testing, but I think pointing out the caveats with respect to memory timings is important here. It would have been best to point out in the video that because you're only testing 2 configs (and I'm sure that was quite enough work), you can't tell apart the effect of latency from bandwidth. That 5% win may not even be due to 8000 MT/s vs 6000 MT/s, it might be due to latency as a result of the (in absolute terms) better timings of the 8000MT/s kit.

[freakut]

Something strange is happening in my pc when I activate the Expo profile, motherboard rog crosshair x870e hero and G.Skill ddr5 2x16gb 8000mhz cl38 and ryzen 9950x3d, when I activate the Expo ram profile and try to run the Aida64 stabiliy test the cpu do not run at 100% it will oscilate and stay like 60/70% of use. When I desactivate the expo profile and run the test the cpu will run at 100% all time. You know why is this? What is happening?

[nothingelse]

EDIT: Just saw you did the ultra chips, I have 14th gen How about Intel? I'm on a 14700kf running 6000 and was thinking of getting an 8000 kit

[NGG]

Can you help me please?? I need to buy a new PSU but I can't decide between "CORSAIR RM1000X SHIFT" and "XPG CORE REACTOR II VE". Which one is better?

[NGG]

Hello, I bought the CORSAIR RM1000x SHIFT but I realized that it doesn't have UVP so I don't know what to do... UVP is very important?? Should I be worried?? Should I return it?? This PSU has the following protections (OVP - OCP - OTP - SCP - OPP) but I really don't understand why they didn't include UVP