BMW 005088 EGS Electronic Transmission Control Sensor Transmission Selector Switch FIXED!!

preview_player
Показать описание
BMW 005088 EGS Electronic Transmission Control Sensor Transmission Selector Switch FIXED!!
Рекомендации по теме
Комментарии
Автор

Hi, I have a problem with a BMW e60 3.0d 6hp26 gearbox, the car shifts perfectly except that when for example I get to the traffic light despite having my foot on the brake the car starts to force itself as if to move forward and to vibrate, I put it in N then in D and it starts again same thing also by putting my foot on the brake in R but it starts to force and vibrate, I washed and serviced the gearbox hoping it will be resolved but nothing, I repeat, the car shifts perfectly and it didn't give me any warning lights relating to it, putting on the diagnosis it gave me such as error 005088 and P0705

romalio_mrn
Автор

I have the same fault code, but my car drives and starts perfectly, accept my car doesent want to change gears when I move off from a red light, but then runs fine when it gets into gear, what could it be ?

holliel
Автор

Hi bro mine does this but my one starts first time drives fine in drive but once I go into sports mode or use the paddles it drives fine once I go bk in to drive

danw-vq
Автор

Hello, I have a 2004 BMW 545i with that same code 005088 but I don't know if it has that connector system as you show

eliesercasanas
Автор

Hi, My 04 530i e60 code is 5088 EGS: Sensor, Transmission Switch L1 - L4. I see your code does not say L1 - L4 other videos mention the problem is the transmission control plate that needs to be replaced. I'm confused

sigfredozepeda
Автор

Hi.
Why do I have error 5143 no message EGS receiver, ACC transmitter?
I have a remanufactured 6HP26 gearbox.
She sometimes drags the gears a bit, 2-3 or 4-3 or 3-2, and suddenly brakes the car sharply.
There is no power, 8.2 seconds to 100 km/h (545 and 5.8).
She has adapted, she has learned, but the symptoms are as above.
Please help.

arasek
Автор

I have the same problem on e39. Don’t know how to fix

drifter
Автор

My 07 320i has this code (a0b6 cas selector lever interlock)… any ideas how to resolve this

kemarharris
Автор

Thank you so much i will tries mine if i gets lucky. Thanks

oghpsgbgn
Автор

Hey i have same problem, but diagnostic dont show me fault code and i cant start car

otoilot
Автор

My bmw 320i gear box light is on and it give some Jack bfr it changes

princemartins
Автор

Please someone help with a suggestion . I have the code P0705 A Circuit
Gear sign and battery light on . The car can start in all Positions P, R, D, N .and when it starts it doesnt show which gear the car on the dashboard. instead I get transmision sign with the exclamation mark in Orange and this is when I can drive the car almost normally and the car can go reverse and from second gear and up but with no first gear and parking sensors are not beeping nor reverse lights working .but if I dont see the transmision fault sign, the car go only in first gear up 20km ph and doest change to second gear and up and no reverse .
I changed the transmission range sensor and bought a new battery and tested alternator with a specialist and said its fine which leaves me frustrated . The car is BMW e46 325i / 2001

maximrabah
Автор

If you think that this solves the problem 5088, then you are very wrong

UefaKupali