🔥Pulse MIG Welding (with the Everlast Power iMIG 253 Dpi)

Last Friday we pulled out the Everlast PoweriMIG 253 Dpi for the first time and ran some short arc MIG beads. Today, we're stepping into some of the higher end features and testing out the pulsed MIG settings. The voltage on this machine goes from -5 - +5. Many of you that are familiar with more expensive machines with pulse MIG may know this as "Trim" and it increases and decreases the arc length.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
VIDEO SCHEDULE:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► MIG Monday: New Videos every Monday!
► TIG Time: New Videos every Friday!

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EQUIPMENT WE USE:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

► ESAB Power Sources: www.ESAB.com

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
JOIN US ON:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ #welddotcom

[sammytrude]

Where did Bob Moffett go? That man doesn't realize how much he advanced my welding career. I'd like to thank him.

[avocadoman]

Just purchased the Power mig 353 DPI for my garage/shop. I already own a 255 EXT. These are excellent machines and have the best customer service. And a 5 year no questions asked warranty.

[clevelandmortician]

Pulse mig on Aluminum is capable of producing superb welds in all positions. This is the first ive seen pulse on steel and the stability of the arc and puddle almost look fictional

[benjaminmoore]

Finally a video on everlast pulse mig welding. I love their machines. Keep making these videos.

[tuckerorpin-wilkes]

Do an episode of the camera guy Welding with bob filmin and commenting lol

[scottcarr]

Hi Bob, I run A Lincoln Electric STT2 which is a pulse mig and it will do welds like that, good looking welds and hardly any spatter. Iv'e worked out parameters that work for me, and it is quite flexible on the types of welds it will do, from 1.5 mm thick expanded mesh tacks with 0.9mm wire, right up to 8mm fillet welds on 16mm thick Bissalloy plate with 1.2mm wire.

[TMRYZF]

Peace, mercy and blessings of God, thank you very much for all the lessons you are doing and I benefited a lot from them. I learned how to weld the welding machine semi-automatic and I hope you can translate into Arabic and thank you for the work you do and wish you all the best 😉.

[МартинДимитров-сг]

Five moths I have welded pulse with Fronius. When you are 2-3 persons welding like this, the noise is really crazy. You can weld galvanized very easy with those settings, it is not burning like normal MIG.

[elkvis]

I recently started working with pulse spray MIG on the Multimatic 255 I use at work, with 90/10 gas, and it is so much better than short circuit, in basically every way. Vertical uphill is trivial with this process.

[champtree]

To the "camera guy" thumbs up! Anyone who puts Bob in unusual places....gets a thumbs up!

[richardsmart]

A very impressive welder. Please keep demonstrating its capabilities.

[Steve_Just_Steve]

SHOUT OUT TO THE CAMERA GUY!!! and Bob too I guess.... ; )

[JLang-bnhs]

Nice to see an old dog excited about new tricks!

[timothyleger]

Nice video Bob !
Nice shirt too !! ✌😁
SHOUT OUT TO THE CAMERA GUY TOO !!! 😂😂😂😂😉😉😉☝️☝️✌😁

[johnw]

All my jobs since school one was flux core 1/16 100% Co2, then railroad company 1/16 spay which was nice except no overhead using 90-8 mix. Last was wheeling wheels 1/16 spray with a machine. Never done pulse mig.

[satamanschmidt]

Bob be styling! Check out that jacket.

[ryanmurray]

I use a miller xms 4000 with 86%ar 12co2 and 2%O2. cant see past it for welding overhead, waay faster than short circuit. I played with the inductance rather than the trim value when learning to control the puddle fluidity overhead. Saying that i nearly always weld on plates coated in weldable primer so a longer arc seemed to help burn through it and reduce the red rain going down my back. Great video. Hope to keep learning from you guys

[johnw]

I love spray fill up gaps and lay down some material. We ran 1/16 wire and 98 2 gas on thick rail road track parts.

[kern-sladeengineering]

Stop making me want to buy more stuff, gimme gimme
Thanks for the vid

[tommyt]

Lol! Right on cameraguy!! Hey though, thanks for helping clarify pulse mig. The 1st machine I bought new, a Migatronics 180 (1983) had pulse and I never used it as I didn't know what the application was for.