REBUILDING WRECKED BMW M3 THAT THE INSURANCE COULDN'T

I bought a wrecked BMW M3 G80 Competition after it had been crashed into a house. The car has unregistered damaged but if the insurance were to inspect this car then for sure it would be declared a complete write off. But im determined to prove them wrong and fix this M3 safely & under budget.

Thanks so much to @jackbuildsit for the help with this build! We couldnt of done it without him!

Carly's scanner and free version of the app with standard OBD features are compatible with cars that have an OBD2 port. To see if Carly's advanced features — like coding or manufacturer-level diagnostics — should work with your car, visit their website. To access these additional features, you'll need to get their yearly license.

👇 FOR MORE CONTENT CHECK OUT MY SECOND CHANNEL 👇

⬇️ ALL MA MERCHANDISE ⬇️

⬇️ Follow Me Here Aswell ⬇️

[RDHDComps]

Good decision to bring Jack on board. He’s the best at what he does💯💪

[robertmayer]

Hi Mat, because of you I have decided to, for the first time in my life, change front disks with brake pads and tie rod ends on my 15 year old car on my driveway. I'm proud to say its a success. The money I saved on labour can now be channeled towards a urgent timing belt change at the mechanic shop. Greetings from Cape town and thank you for inspiring me to have the courage to do something I had no clue on how to work on my car.

[SteveGunderson]

20:10... I love your dad... His positive energy and permanently smiling face serve as perfect icing on the cake. Thank you for such wonderful content!!!

[shane]

Jack is a dude for coming over and helping, taverish only knows the best of guys..❤

[jus__gra]

Seeing Jack is making an appearance I’ve never been so giddy. He’s honestly a magician with bodywork!

[schrodingerscat]

Yet another absolute triumph. Jack did a great job matching up those panels and welding the seams. The colabs with the guys from the US are a great touch and must be getting the channel a good deal of exposure in the US.

[PrinceCbass]

I am sure someone else has mentioned this in the comments but here I go just in case not....where the 1/4 panel meets the other parts I would normally put a sleeve behind the joint. Just a small piece maybe an inch wide will work well. When making the mark on the roof rail and rocker panel, these pieces can be trimmed to use as the backer part. This allows you to have some wiggle room where they come together and lets you weld without worry of melting the thin sheet metal. If you are really experienced with welding sheet metal it isn't required but I always found it helpful. It only takes a few minutes to prep the sleeve and tack it into place. Other than that I think you guys did a really good job, especially for someone who has never done this before. It is great to have someone like Jack to guide you. This is going to be a really sweet deal when you are complete.

[zollotech]

What a massive amount of work, but looking great!

[johndean]

Got to say Jack is a Class Act. Those seams were spot on after he welded it all together. Well done mate nice job.

[leobats]

This is an insane project. Much more difficult than I expected. Jack is a legend. Good call to have him involved.

[martinbarker]

Guys get a proper mask on when painting, trust me. I have lung damage from not doing this 😢

[matu]

I've tried to watch many other channels similar to this, but none of them nail the pacing as well as you do. Most channels take the easier route of just timelapses, but your videos have never left me wanting to skip ahead to hear someones voice again. Keep at it, you're doing fantastically!

[NicoLeonard]

Mat, Fancy going to Rick Ross his car show 😂😂

[symbiote]

my dad owns a car repair shop in the netherlands, i basically grew up in there. working for 15 yrs with him now after being done with school, and i can say with everything i saw and learned there... u guys did a GREAT job fixing this. WELL DONE Mat! cant wait for the next Vid, cheers

[SludgeBrain]

Bro your dad is so happy just to hang out with you and fix cars all the time. That's a blessing for sure.

[scotts]

Jack is the man!!! You couldn't have found a better guy to help you with this massive project. The man is a perfectionist.

[conorholmes]

I work in an assembly factory and watching Jack do body work of any kind is actual art, you brought the absolute best of the best across the pond 🇨🇦

[bradyspage]

I am astounded on how well the fitment of the quarter came out considering how much was replaced and the initial damage. You and Jack did a phenomenal job.

[anilajmeri]

Me and my 6 year old son really enjoy watching your car builds..

Amazing skills

[atkt]

Jack makes the repair look so straightforward. He is a true master of his craft. Amazing video gentlemen