RB25DET GReddy Intake Manifold Install | Water & Vacuum Line routing

This has been a highly requested video so I hope it helps you guys out! Installing the Greddy (Freddy) intake manifold was easier than I expected. Not only does it look so much better than the factory manifold, it will be way easier to run the intercooler piping.

Follow us on Instagram! IG: Drift Magic

[Doitlike_JC]

Finally found where to put that turbo coolant return! Thank you!

[ejracing]

Which you never stopped uploading this videos, they really help those who don’t know much about this motors & are looking to do a similar project

[markurquhart]

Good video mate. You may want to rethink your coolant plumbing. The thermostat allows cool water from the radiator to flow in to the block not hot water to flow out. When I did this setup myself I ran the turbo water return into a tee between the greddy plenum and the top radiator hose (similar setup to the stock RB26). This will send hot water from the turbo straight into the hot end of the radiator where as your current setup has it heating cold water coming from your radiator. I found it difficult to find information on this and spent a lot of time on it. Thankfully I no longer need to worry about it as my new turbo isn't water cooled.

[matthewwinsor]

I was just looking for information on the RB25 for my R33 build but I love the vibe of your videos definitely subscribing

[RANGAMvK]

that is exactly how i did my hoses for vac, og nissan hoses

[MrSmiley]

I'm going down the same path as yourself right now too, This video will help so much man thanks. I'll probably just cheap out and buy the Freddy ffp since it looks relatively nice and save some coin!

[rebelient]

You have no idea how many times i watched this video just to figure out where all my lines are supposed to go lol

[vtsrobbo]

Really good video dude, just what I needed! Thanks

[HashiriyaSquadron]

Nice. This helps me out too. I've got the same manifold for mine.

[kevinvilla]

good explanation really was just what I needed
thanks from mexico

[mostafayonis]

Hi brother good job 👍 . These setup is working with company ECU or not? . And there is any problem with idle ?

[joc]

did you use the side feed injectors and rail on the manifold?

[TriniRogue]

Solid video man, clean install and clear explinations keep that shit up :o

[MrTurk]

love your dogs ears!! good looking puppy

[dylanjoseph]

Where did you get that adapter from.... also is there any difference in wiring? Can they stock wiring reach the throttle body as it is much further away from the stock position? Does this need a tune fix idling or rough starting??

[HackerProHacks]

How does your icv work if it’s connected to the manifold after the throttle body?

[mikeru_s]

would this process be about the same for the rb20?

[FootageFactory]

Dang, you never did finish the build video? Unless you did and I dont know where to find it. I just want to see how you routed the intake!

[jaydenwatson]

Hey man I am currently doing this on my 25det r32 and was wondering how you got your parts so clean after you removed them off your old set up? I have tried degreaser and i can’t get the finish you do on your parts?

[RACable]

what sensors did you use for the coolant temp locations on the manifold? or did you re-tap the locations for the factory sensors ?