Practice design 5 in catia v5 #3dmodel #3dmodeling #engineering #catiav5tutorial #catiav5 #shorts

How to Create a 3D Model from 2D Drawing in CATIA V5 (Beginner's Guide)

In this tutorial, I will show you how to create a 3D model from a 2D drawing in CATIA V5. This is a beginner-friendly tutorial, so no prior experience with CATIA is required.
we will learn how to use the sketching tools to create the 3D model.
I will walk you through each step of the process in detail.
By the end of this tutorial, you will be able to create a 3D model from a 2D drawing in CATIA V5. You will also have a better understanding of the 3D modeling process in CATIA.
I have used the following tools in part design catia V5 to create this 3d model from 2d drawing:
1. sketcher - sketcher tool is used to create the required 2d profile.
2. pad,
3. pocket,
4. fillet.

If you have more interest in 3d modelling, you can watch the following tutorial that might excite the 3d modelling enthuastics and these videos will also helpful for engineers especially mechanical engineering and aeronautical engineering students.

for mechanical engineering students:

for aeronautical related designs:
How to design aircraft in catia v5:

for beginner pratice designs:

#catia #catiav5 #partdesign #catiav5tutorial #mechanicaldesign #mechanicalengineering #3ddesign #3dmodeling #3dmodel #beginner #catiatutorials #practicedrawing #practicedesign
#2ddrawing

[vickyshinde]

Show properly which command r you using