FreeCAD version 0 21 1 part #64 2024 How to 3D

FreeCAD version 0 21 1 part #64 | 2024 How to 3D
Welcome.
My name is Miro
In today's video I will show you in software FreeCAD version 0.21.1. how to 3D model
In part design, I created a 3D model that is simple and, in my opinion, looks quite interesting. To begin with, I chose the "Additive sphere", selected a plane and a new sketch. In the new sketch, I drew the shape that I wanted to remove from this ball, I defined the necessary dimensions and after confirming the sketch, I chose the "Groove" function, where I removed the material around the entire circumference. I also called "Polar pattern" and so I rotated the Groove operation by 90°. Maybe even this short tip will be useful to some of you
Thanks for watching
Have a nice day.
Other videos:

Vitajte
moje meno je Miro
V dnesnom videu vam ukazem ako vytvoriť 3D model v programe FreeCAD
V part design som vytvoril 3D model ktory je jednoduchy a podla mna vyzera celkom zaujimavo. Na zaciatok som zvolil guľu "Additive sphere" vybral som rovinu a novu skicu. V novej skici som nakreslil tvar, ktory som chcel z tejto gule odobrat, zadefinoval som potrebne rozmery a po potvrdeni skice som zvolil funkciu "Groove" kde som material ubral po celom obvode. Zovil som este "Polar pattern" a tak som operaciu Groove zrotoval o 90°. Mozno aj tento kratky tip bude niekomu z vas uzitocny
Ďakujem za sledovanie videa.
Prajem vám pekný deň.
#freecad# 3simplepart #partdesign

[MirkoFaustini]

Molto bella e grazie per renderlo facile

[HowardLen]

These are awesome videos for getting started on FreeCAD, I worked through all of them and by the time I did I had some great basics to start with more complicated things.

Thank you for putting this series together

[aurobindadash]

I have to make a hollow hemisphere of 150mm dia with square grooves of 0.8 mm at distance of 1.2mm. Is it possible?

[aurobindadash]

How can we make 100 numbers of grooves in only one direction? Is it possible in this software? Please help.