Waterproof Plywood Deck - Liquid Rubber - Polyurethane Deck Coating Video

Waterproof your Deck with Liquid Rubber Polyurethane Deck Coating This is an easy DIY project that will save you time and money. No need to hire expensive contractors when you can do the project yourself.

Steps:

1. Ensure a clean, dry surface
2. Prep joints, seams....
3. Apply/paint Liquid Rubber Multi-Purpose Primer
4. Apply/paint Liquid Rubber Polyurethane Deck Coating
5. Shout from the mountain tops when you complete your project.

Liquid Rubber has great technical support if you have any questions about your project or the products.

#LiquidRubber #Waterproof #Sealant #HomeRestoration

Please take advantage of our top rated customer support:

Liquid Rubber
1-855-592-1049

Other uses:

Concrete Patio
Pool Deck
Enclosed Trailers
Deck Boards
Fences
Laundry Room Floors
Basement Floors

_ _ _ _ _

Social Media:

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in offering 5 Star Customer Support to help complete your project. We believe in Free Shipping direct to your door, no running all over the place.

We were established in the early 2000's and provide a wide range of water based, VOC and solvent free products. These products cure to provide a seamless, fully adhered flexible membrane which prevents water ingress and resists damage from water, UV, salt, thermal cycling and harmful chemicals. Available for Commercial, Industrial and Residential markets.

Products are manufactured in North America with distribution offices globally.

[camb]

Stoked it is a Canadian made product. Gives me the confidence that it's built to handle the elements as well. The fact that you have responded to every one of these comments gives me even more confidence in your product. Can't wait to try it out on my deck!

[BahianoReno]

Great video my friend, very informative, thank you very much for sharing, keep safe

[cm-exnb]

is there any way to apply it so you dont see the seams and the geo-textile? because the edges dont look that nice.

[kbkb]

When the product eventually wears out, can it be patched? Or how do you repair it. I will assume it will have to be done again in 5 years due to the beach and sun where we live. Any info you can provide would be grateful. This seems to be the most easy waterproofing system I've seen.

[starke]

Can this be used in cold climates ie snow load? Can it be shovelled when cured ie snow shovelled off of deck?

[mk]

Great vid! I like where it started so you can apply it however!

[swatibansal]

What about OSB floor? Can it be directly applied over an OSB subfloor/floor?

[jorbedo]

How it will perform on a outside deck near marine applications? (Salt water), At the end "Avoid hot intense sunlight", on the install or for the lifespan of the surfaces?. Thanks.

[sunnyBLR]

Hello, after applying the primer, i see that the person in this video is walking on top of primer. 1. Will that not be sticky to walk? 2. And walking on the tacky primer will ruin the primer? I have a a large 34x16 ft second storey flat roof balcony. Its too large to apply all at once. 3. how do you propose i divide the primer and coating into doable sections? Thank you.

[vcl]

We just framed the deck. Is this an alternative to vinyl and can it with stand the pressure of sleepers that have 5/4"×6 cedar 12' . Also can this be applied to existing torch on ?

[sashikawickramasinghe]

Can I use this for wooden dome house exterior water proofing, ?

[rolffrankenbach]

Could Liquid Rubber be used to water-proof second-story deck made from TimberTech (like Trex, but another company) and Dexerdry waterproofing splines between the boards? The dexerdry was not installed correctly so the deck leaks. Or, do I first need to recover the TimberTeck with new plywood before I apply the Liquid Rubber?

[MrCramirez]

Hello and thank you for uploading this informative video. I am looking into using Liquid Rubber on a 5, 000 sq ft. plywood patio deck. We fixed the plywood on multiple 2x6x12 wood boards with screws every 4 inches. There is a significant amount of screws. I noticed in your video that you only filled the plywood seams and not the dents from the screws. As such, is it not required to use wood filler nor the Geo-Textile on the plywood dents made from the screws? I would greatly appreciate your response. Thank you!

[lucasdarst]

I am building a wooden pool can I use this to seal plywood for submerging in water?

[christianelapointe]

Can I use this product to repair a small leak on the metal roof of my Promaster Van?

[brendakilberg]

What did you do on the sides of the deck so it looks finished? Flashing only? Liquid rubber over the flashing down to drip ledge?

[rtistry]

Built an outdoor ramp 3 1/2 ft by 8ft. I'm worried Liquid rubber will be slick to walk up when wet. Any feed back will be appreciated

[barttobias]

I am thinking of using this product on a new 3/4” ACX pontoon deck. My only reservation is that I don’t like how at all the taped areas show through as a raised bump. Is there a way to make it look seamless at the joints? Any ideas out there?

[davidrebalkin]

How does this hold up in changing conditions. Can be close to -40c in winter and sits around mid 30c all summer. Looking to redo a large deck.

[bryanrichardson]

I’ve got this on an existing deck already. But it’s bubbling and peeking in a low spot where water sits. Can I put salt leveling concrete on top and then re-coat the concrete?