Seat Alhambra (7N)/Vw Sharan rear eletric doors calibration

After disconecting the battery, the rear eletric doors will lost their calibration, won´t open and the buttons blink.
It happens because the windows lost their calibration.
To calibrate the window, fully open the windows by pressing and holding the switch and then realese the switch and press for 3 seconds, then close the windows by pressing and holding the switch and the release the switch and press for 3 seconds.
The light will stop blinking, then open the door and it will calibrate by it self.
Do the same procedure for the other door.

[andgaal]

Thank you!! helped with vw sharan 7N 2015. One of the doors did not open after battery went flat.
For those that says it did not work: when the window is down PUSH down the button for 3s, when it's closed PULL up the button for 3s.

[curtishagen]

thanks for your help, you saved my journey going to the garage, that was quick and simple thanks again. 👍

[dimitriev]

Thanks for the video! Works for me!! I was so confused when I saw that blinking button!

[urslemp]

Thanks Diogo this worked perfect. I had to open the windows out in the sun and forgot to switch off the car. So after 3 hours the battery was flat and symtoms exactly as you documentated.

[shafrazrafaideen]

Thanks for your video. U saved my money, brov... thanks again

[NikolaR]

Can't believe this worked! Thank you king!

[eric]

Thank you so much, very useful is also easy and quick, you save me money.

[vendoopermuto]

It worked on the left door but not the right. Any suggestion?



[Weezysean]

Thanks worked for me on my seat alhambra 2016

[resin.and.woodworking]

Thank for your help.. it helped me alot ❤

[konstantin]

Super ! Bei mir hat geklappt. Ich muss noch Tür mit Händen komplett auf und dann wieder zu.

[maxmilnikovski]

Всем привет. Шаран 2017 года тоже калибруется. Спасибо за видео. Один вопрос остался без ответа: ЗАЧЕМ ТАКИЕ

[cristiancoza]

Si jamais la manœuvre ne marche pas, vous devez forcer les portes à s'ouvrir ou à se fermer. Si la porte est fermée, tirez la poignée de l'extérieur et mettez un peu de force pour la forcer à s'ouvrir. Si elle est fermée, poussez la porte pour la forcer à ce fermer. Dans les deux cas, les boutons arrêteront de clignoter et les portes marcheront de nouveau normalement ! J'ai perdu une demi-journée à essayer d'appuyer sur des boutons et à faire pleins de manipulations, mais la solution était simplement de forcer sur les portes 😂

[zeeshanumer]

Thanks, it’s really work for me, save lot of money . Appreciate magic 🎉😊

[Teofarz]

i have a sharan - one of the doors is flashing - but is operative fully - it is just flashing from time to time - why?

[francobones]

I have a solid light on one door after a dead battery, i tried this method and no joy, any suggestions?

[miki]

Dziękuję bardzo mi to pomogło pozdrawiam

[aliedelarocha]

Very thanks. It's work for me. Tq sharing

[bledihasa]

Is the same thing for sharan, couse i tried it it didnt work

[tiagonunes]

Muito obrigado! Já não sabia o que fazer...