Finally a Real Innovation in Woodworking - Full Build Video

Become a supporter on Patreon and get access to "as it happens" project videos, plus regular updates on what I'm working on:
I'll be doing all of my full build projects this way from now on, posting progress videos on Patreon and then putting them all together when it's finished to post here. This takes a bit of the video editing load off of me, since I'm doing smaller pieces as they happen, instead of one big long one at the end.

How I made the twin screw gear connected vise:
Get the plans for the gear vise:
Plans for the drill press table:
Drill press table build video:

The biggest thing I hated about my drill press was manually cranking the table up and down. The rack that makes that happen bent and wouldn't work right again after that, plus it's quite a reach around with a wooden table installed.
As for the vise, the idea occured to me while doing another project that it would be great for drilling into the ends of shorter stock, or for holding small parts while drilling. Since I wasn't using my twin screw vise where it was, I decided to use that. BUT a simple moxon vise would work as well.

So, what's up with the split personality? Am I losing my mind?
Maybe. But after 12 years straight of making videos, I need something interesting to keep me engaged.
Doing this came to me when I thought about the changes I'd already made, and how I'd have to undo them to go ahead with this upgrade. So I had one of my typical pros and cons conversations with myself and thought it would be neat to act it out on video.
Will I do it again? Maybe, but it's harder than it looks and I can see myself skipping it because of that and how long it takes to film and edit.

▶️Support the work I do on Locals:
▶️ Patreon:
▶️ Join my Makers Mob for detailed build tutorials:

My "Scrap bin" channel:

#ibuildit
#woodworking

[JohnHeisz]

Become a supporter on Patreon and get access to "as it happens" project videos, plus regular updates on what I'm working on:
I'll be doing all of my full build projects this way from now on, posting progress videos on Patreon and then putting them all together when it's finished to post here. This takes a bit of the video editing load off of me, since I'm doing smaller pieces as they happen, instead of one big long one at the end.

How I made the twin screw gear connected vise:
Get the plans for the gear vise:
Plans for the drill press table:
Drill press table build video:

The biggest thing I hated about my drill press was manually cranking the table up and down. The rack that makes that happen bent and wouldn't work right again after that, plus it's quite a reach around with a wooden table installed.
As for the vise, the idea occured to me while doing another project that it would be great for drilling into the ends of shorter stock, or for holding small parts while drilling. Since I wasn't using my twin screw vise where it was, I decided to use that. BUT a simple moxon vise would work as well.

So, what's up with the split personality? Am I losing my mind?
Maybe. But after 12 years straight of making videos, I need something interesting to keep me engaged.
Doing this came to me when I thought about the changes I'd already made, and how I'd have to undo them to go ahead with this upgrade. So I had one of my typical pros and cons conversations with myself and thought it would be neat to act it out on video.
Will I do it again? Maybe (most likely, actually), but it's harder than it looks and I can see myself skipping it because of that and how long it takes to film and edit.

[Lutzboater]

Not only an ingenious build, but your tolerance of that other guy is commendable.

[greglamphier]

This was fantastic sir..
One of YouTubes OG’s of woodworking still bringing it…
Thank you for all the entertainment and knowledge you’ve given us over the years

[apowell]

That by far is the coldest mad scientist (engineering) I have seen and probably will ever see for a drill press. Nicely done!

[TokyoCraftsman]

The opening was very well done.
Your drill press mod is amazing, you certainly think outside the box.

[CheveeDodd]

The editing was super fun on this. Great project too!

[digdugdat]

You know, its been a while since I checked in on your uploads. Imagine my shock to know that you're perfecting video effects to the high level of craftsmanship that you apply to your woodworking. Thanks for the surprise, keep it up.

[silverfox]

You never fail to impress us John. Always thinking outside the box. Repurposing parts and materials is always a plus. Great result. Thank you for sharing.

[ChuckBronson]

Hi John, I just love your new format of arguing with yourself on how to do the project. It must have taken you a month to edit the video. Great job

[sprinvntrdd]

The back and forth banter between self and persnickety self is a fantastic feature to your already wonderful video and consice helpful educational comentary. All the best to you, watching you from Salvador, Brazil.

[hjboots]

I am always in awe of your woodworking skills, plus sharing them with us woodworkers helps us save money on alot of things you produce. Thank you for sharing.

[ClintonCaraway-CNC]

I will probably never build or upgrade anything like is done on this channel but I do enjoy watching these ingenious inventions come to life.

[omarc_br]

That's some real improvement! Awesome design, John!

[madmaxh]

That's a GREAT project. A few years ago, I installed a DC gear motor on my drillpress to raise and lower the table. It works for my purpose.
Now maybe, you might want to invest in a keyless chuck.

[LgosseuxDbois-TheWoodpecker]

This is amazing thank you very much to share your journey with us

[SimgoWood]

I like the idea of a vise allowing to drill end grain on long pieces.

[robertwittman]

wicked cool, bud. wish I was half as innovative. glad there are those like you who share their genius. Thanks!

[bradleytuckwell]

That has to be the best set up for a drill press I’ve seen on YouTube

[bellevuesnekkeri]

This is one sweet build John. I am also tired of knocking the skin of mu knuckles every time I lower or raise the drillpress table. And as for johnny-boy....you´ll get him straightened out and he´ll be an asset for sure. Great editing, I guess it was pretty time consuming. Good job Sir

[rguadian]

That last interaction with yourself couldn't be more spot on lol! Love it, keep up the good work my man! 🫡