ExpressLRS V3.3: Now supports SBUS! (ELRS)

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#ExpressLRS #painless360 #howto

[radmoore]

I haven't gone to ers for not having sbus for stabilizers, plane flyer, Got to re-think it now, thanks you Lee !

[waterbowman]

Many thanks, answered my confusion on buying a radiomaster pocket with ELRS module+ER6 PWM receiver. Pretty cool can configure outputs on the receiver!

[umbrela_Corp]

Got me a superp on the way from china, it has been the longest wait time ever and ive never been so excited waiting for something

[HartnerX]

It's nice to have for all the old stuff.

I haven't had much luck though, tried converting an old Vortex 285 to ELRS for a friend. A Sbus to CPPM adapter are needed for those. So flashed 3.3 to the receiver tried and got a Sbus signal on my battery checker, but when connecting to the CPPM adapter nothing happened.

Ended up having to use CRSF and have a Matek CRSF to Sbus converter in-between the receiver and CPPM adapter for it to work.

Got it up in the air with ELRS in the end, but had hoped to not need the Matek board in-between.

Never figured out why this wouldn't work, but he's happy in the end and the end result is still smaller than he's old Duplex receiver.

[Bulu]

Awesome 👌 content. It's a learning channel.

[tinocarnio]

I replaced the rx with the er8gv which works perfectly on its own. taking the 4-wire plug directly from the rx and inserting them into the sparrow2 using the crsf or sbus protocol does not make the connection (express 3.3.1)grazie

[victorwild]

I have been doing all of this since3.1 came out at least 2 months ago?

[BgBrik]

I have a Radiomaster ER6G that I was hoping to use in a glider to replace a FRSky system. My setup is three PWM channels in the Fus and S-Bus to the wing where I breakout to four PWM servos. Whilst I can replicate this setup with the ER6G I find that the Fail Safe does not operate on the S-Bus channels to the wing – an important safety feature for a glider. Is that a “feature” or am I missing something in the setup.

[GhostRyderFPV]

_"Insert Xzibit meme"_
OK!
Now my ELRS rigs all have 3-wheel motion, Neons, and at least 2 Wings. Tupac discographies loaded on SD cards, sorry BlackBox. Oh, and my FPV camera is mounted on a popcorn maker, for some reason.

But on the serious, I have a bunch of Omnibus F4 equipped planes, currently with FrSky Rx's. This will invigorate the fleet, and I can stop being nervous about range and Freq Tuning FrSky Rx's using a Multi-Protocol module

[yancymuu]

Thank you for this video. I just reconfigured my radiomaster receiver per instructions and pixhawk 6c/px4 fc began to receive commands per Qground control. I was trying to customize PX4 firmware to make work, but not so easy task for a beginner. Next need to figure out how to get return telemetry to transmitter. A video on this would be super.

[MrDayinthepark]

I found Chrome did not open the web page, Safari did. Not sure why, but definitely browser specific.

[DCO_JP]

I was gifted an old TGY-I10 transmitter and now I'm lost trying to figure out what Rx to use on a quadcopter. I have a PWM to SBUS converter, so I could get an ELRS with PWM pins, but could I also just get a regular VCC, GND, TX, RX ELRS in CRSF or SBUS to work with the TGY-I10? My flight controller has a couple of SBUS pads. I watched all of your TGY-I10 videos and am so lost.

[christmasgiftidea]

Hi, Geprc Elrs dual diversity receiver connect with SBUS protocol to FC, its giving only 10 sensor telemetry, can I get telemetry with if receiver Rx connection to FC telemetry TX ? Is this possible?

[jimmybrouwer]

Where you almost diving in turkey at any chance? Greetings

[yakacm]

I'm pretty new to RC flight and even newer to ELRS. I've got a TX16S 4-in-1 version and a BetaFPV micro ELRS module. Watching videos I know that CRSF is the default for ELRS, but when I look at the other options to choose on the BetaFPV module, I can see SBUS, DSM, PWM and I can even see Multi as an option. I've tried looking around online, but I can't seem to find anything about these other protocols.

[fordboyzzzz]

My ER8GV wont let me pick any channel for serial tx. figured it out - dedicated port only. all good & working now.

[tinocarnio]

Good morning, I followed your explanation preciselyI have the same RX, I took the bus from pin 2 and inserted it on Sparrow 2 in the right position. The TX is the pocket and the commands come out of the RX but when I increase the motor, the servo elevator also moves What did I miss at the same time I have no signals on the rc toolkit Thanks, I hope for your help

[girlrumba]

So if it wanted to use elrs on lets say omp m1 m2 I could do that

[leonorehamer]

Complete newbie here, if you can use pins for serial does that mean you could instal a 3rd party GPS that way. As still no GPS for it as far as I can see on the RadioMaster site?

[gflorey]

Hi Lee, thank you for this video - Great news. I have a speedybee FC. I am going to use a ELRS now with SBUS. I have the normal controls for the AtomRC Swordfish (4 channels just for the surfaces), but i use switches for alt hold, arm, RTH and auto trim, do I need a channel for all of these functions? So I was thinking of getting a 8ch ELRS, but if a 6 will do then great.