CENTER SPRING AND CLUTCH SPRING, ANO EPEKTO KUNG HIGH RPM AT LOW RPM? | CVT | PANG GILID | FLY BALLS

Ano ang mga epekto sa ating pang gilid pag High RPM or Low RPM Center Spring at Clutch Spring ang gagamitin natin sa pang gilid(CVT) ng ating scooter?
Paano gumagana ang torque drive assembly?
Ano epekto sa ating pulley and flyballs?

Check out more videos here:

#Centerspring #Clutchspring #HighRPMLowRPM

[reneboyvlogs]

itong ang magandang explanation step by step at mau editing pa para madaling makuha.ang pinaka dabest ang Demo Vedio

[johnacemedina]

Finally. Someone who is knowledgeable.

[edgardoblancojr.]

Baguhan pa lang ako sa motor at pinag aaralan ko pa bawat parts . Eto lang talaga naiintindihan ko ang paliwanag 🤙

[terrencerey]

2 yrs na akong gumagamit ng scooter, pero ngayon ko lang naintindihan yung clutch at center spring. Sunod lang ako ng sunod sa mga mechanico pag gusto ng bagong takbo.
Currently, jvt pulley at rs8 lining, 1k center spring at 1300clutch spring.
Top speed 133 click 150i

[clarkcaparas]

Now ko lang naintindihan ang trabaho ng mga pang gilid. Good explanation and content. Keep it up 👌

[pitiknidaks]

so far ikaw ung motovlogger na merong sense at very technical, you should get more likes and subscribers

[chrisropherarcenal]

dapat ganitong vlog ang sinusubscribe very imformative..
keep up sir.. nakakaintindi na ako kung pano mag work ung pangilid..

[Eugene]

Sakin honda beat fi di maka akyat sa bundok namin dati stock tuned CVT.Nag diy tuning ako 10g flyball 1k center spring stock clutch spring, yun kayang kaya kahit may angkas sa akyatan, at engine braking nya matagal sya mag high rpm which is the best for me iwas init sa brake system kaso downside nito matakaw sa gas, delay, iikli buhay ng belt at engine oil..

[maanmenpin]

Pwede ba mag palit ng flyball skydrive yung ilalagay.. sa Honda click 150 2017 model?

[mylordass]

Could you please, please, please add English closed captions. This is the best explanation of how both sets of springs work but I can not understand it all apart from the diagrams.
Excellent video.

[rodcabansag]

Napaka informative ng video niyo. Maganda at simple ang presentation very friendly lalo na sa mga newbie. Salamat sir. More teachings pa sana sir

[cliffordfrancisco]

Recommended ba higher (1k RPM) center spring and clutch spring sa naka kalkal na df pulley and bell pero stock ang makina?

[marcialaquino]

Thank u sir for the very informative explanation po, ganda ng editing mas madaling maintindihan...keep on Vlogging...
God Bless...

[dabidmarayag]

eto pinaka dabest na napanood ko among others, well explained detailed talaga.

[jheyzbondmoto-klista]

MSi115 all stock naka center spring lang na 1krpm. Pero mag combi ako siguro ng 9/10 na bola next. Next is kalkal pulley at pa angle ko na lang drive face. Pero medyo lumakas sa gas nga. Eto malinaw na paliwanag! Thanks bro!

[jaysongaquino]

So clear, masarap panoorin explanation..magaling ang editing..keep up the good work

[RespetoKagulong]

sakto tong vid na to saken, planning to buy a Scoot this summer, 1st time ko magOwn ng Scoot if ever, mas magegets ko to lalo kapag meron na ko hehe, thanks for sharing Master ✌🏻

[mjbever]

Good video 👍🏼
I don’t know the language but the explanation was understandable.

[leerobertlascano]

Suggest nga po ng advisable na gilid setup ng 59mm 28 carb para makuha ang torque na mataas pang ahunan

[jervieconcordia]

Sir ano magandang bola ng honda click125 tpos ano din magandang center spring at clutch spring imean set combination po