shower door won't close? try this

This is the easiest DIY fix is these shower doors when they start to sag! if your shower door is not closing properly, getting stuck and hard to open then this 2 minute video will be just the one you need to see.
Gidday, I'm Kent. Join me in this outdated ensuite where we adjust the aluminium framed glass shower door that has found it's way out of alignment, it's an easy fix once you know how!

Click here to subscribe (it's free) and you won't miss any of my DIY tutorials on Youtube

The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
Amazon:

eBay:

The boring stuff, these videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Kent Thomas & Inspire DIY do not take any responsibility for any action taken as a result of the information or advice on this YouTube channel (or other platforms) and shall not have any liability in respect of any injury or damage that may result.
Kent Thomas/Inspire DIY disclaims any control over, relationship with, or endorsement of views expressed by any third party, including but not limited to, sponsored partners, featured guests in any episodes, or other YouTube (or other social platform) users. Any unsponsored links to other websites are provided only as a convenience, and not an endorsement of those pages by Kent Thomas/Inspire DIY. Kent Thomas/Inspire DIY encourages you to read the privacy statements of any third-party websites.
Kent Thomas/Inspire DIY does not warrant the accuracy, completeness, or usefulness of the information available on this YouTube page or any other social media platforms. Nothing contained in or provided though this YouTube page, website or social media platforms is intended to constitute advice or to serve as a substitute for the advice of a building or construction professional, or local government, council laws and building codes. Any reliance you place on such information is strictly at your own risk.

[jei_]

This is the best DIY channel!!! Saved me the hazle of paying someone to come look at my shower door.

[RomanJoost]

Most underrated Australian DIY channel. Thanks for so many tips. Keep up the good work!

[bretteaston]

Thanks Kent. A straight forward, clear, no BS or time wasting tutorial. Worked a treat for me.

[CarlosMossman]

Great work Kent. My shower door however had two screws, both inaccessible because of the top shower cover plate. By standing on my step ladder and forcing the top cover plate up with my shoulder I removed the top of the shower door from its' hinge which gave me access to the adjustment screws. Adjusted, replaced, perfect. Thanks again.

[davidharman]

Thank you, Kent. Your video came up at the top of my Google search, so I think I can see why.

[DADnRN]

2 years and you’re still helping folks. Thank you, sir! I was about to lose my damn mind with my shower door 😂. Thank you again!!

[vyt-sd]

Thank you, I had to do something different but this video gave me a starting point to think about what needs to be done.

[deborahjordan]

Just how the Bunnings professional told me BUT I have a pivot door!!!! I didn't even need to google the name bcoz I was taught words like pivot in 6 years of compulsory physics. So I think the guy in Bunnings thought I was a sweet thing without a clue. Thank god someone else helped me with architrave profiles!!

[amateurmakingmistakes]

Thanks, Kent! Great video and I'll check out your other tips when I've finished fixing a shower door.

[ryan_]

I have the same issue but i do not how to do until I watch your video, thanks mate

[rtedcr]

Nice work .
I will fix my door right now.
Thanks for the tip.

[johnlarro]

I was so excited when I watched this Then I went to the shower in this house we have just purchased, and - it's nothing like the one you have. :} Rivets holding the pivot mechanism to the door frame... And no idea how the pivot mechanisms are attached - no sign of screws anywhere...

[robertalleway]

Hey Kent,
I have a riveted shower door hinge with tall sides as frameless (frames are on top and bottom sides only). Any clues here?
Great video

[trilliance]

you said, "we are gonna need 2 things, " and I was thinkin the first one is you. :)

[jasonrowe]

My door has a similar fitting inside the top frame of the door, except it has a cylindrical shape protruding downwards that fits in hole in the door frame - which prevents the fitting from being able to be slid in either direction.

[williemuhammad]

Thanks 😊 for sharing the information 😊

[byronandkellytravel]

Hey, what if there’s no screw visible? I’ve got the same type of door but the top of it is just a flat piece of metal the whole way across the top…

[Skavatar]

thank you. that top screw came loose after about 20 yrs. just realigned the shower door and tighten that screw.

[LoverOFhopeANDcompassion]

Mine rolls smooth BUT gets stuck last foot & half at closing side. Gets off track when i open it. Installed new Dec 2021. Please any hints??

[katherine]

How do I replace the plastic gasket around the glass? Mine is so dirty and pieces of it are missing.