Estimation of Reinforcement in Foundation & Column

Estimation of Reinforcement in Foundation & Column.
Quantity for Stirrups in Column.
In This channel you can learn about Civil Engineering Update Videos which are using generally in civil Engineering. So please subscribe our channel for daily Update Civil Engineering click on this link.

[jewelhossen]

when you calculated 12mm xx & yy axix lenght may be it will, L=3000-2*side covers+2*300-(2side*2*top &bottom*)
so, L=3000-2*100+600-4*50
L=3000-200+400
L=3200
L=3.2m
tnx

[mansooramini]

I usually follow your videos it is useful, but try to provide one video regarding design a project 3 or 4 storey house structure design Manually it very important point I need also .

[santoshacharya]

10 min wrong calculations i. e. (3000-2*50)/200 +1 =15.5 ==16 nos of bar

[heronsio]

Bend bar cover should be times to 4 because of top and bottom and two sides, also minimum concrete cover for footing on ground should be 75mm.

[emmanuelabayisenga]

I, m Emmanuel I, m civil engineering student, If possible for next sessions you can teach us about indeterminate, determinate structure analysis and reading well building plans

[navalmalpani]

hello sami, you have not subtracted the hook lengths of 2D in the first steel calculation. aren't we supposed to subtract the lengths caused by extensions and bending?

[muhammadshahzadparacha]

thanks for the video sir but if 50mm is concrete cover and multiply by 2 for top or bottom so is the one side i think it should be multiply by 4 to minus the both side top and bottom concrete cover

[samadable]

Thank you very much Sir. i like the way you are teaching.

[manjeets]

Hi sir, thanks for the videos. i want to ask that how can i find out the volume of bar. Thanks

[myqsu]

3. Even you didn't deduct 2 side bend angle. It should be deduct as follows if 90° angle we have to follow Biritish standard formula .It means 2d "d" mean dia. 2*12=24mm for one side, so two sides to be deduct 24×2=48mm

[tauquirtarique]

Sir, length of vertical bar
Why you subtract cover at top 2 times. I don't understand what is the need of subtract side cover to get vertical length...
Please answer

[myqsu]

6. Cutting bar length is 2900+400-48mm =3252mm (each bar cutting length is 3.25m)

[samadmaz]

please estimate a residential building (framed building)

[satyavenipangi]

Sir can u explain as per diploma C20 sybullas quantity surveying 2 good explanation

[chamarasp]

thank u for your lesson. can u please explain at the time of 6.26 why did u only multiply 50 by 2 instead of 4. thank u

[vlogofgangaandgopal]

Sir I have used 12mm rods in columns in ground floor only but now I want to build 4 floors on ground floor , can I use some reinforcement in columns so that I can construct 4 floors on ground floor

[nkundamaxyime]

thank you for sharing my question is how do you relate the footing design to the earth pressure

[gudoimicheal]

I was asking also taking off a building with footing

[vikeshsingh]

Sir I have doubt about slope in road construction if the height of road is 6m then what should be horizontal distance of ramp slope

[naveensomarapu]

Explain the steel, cement and sand needed for the residential bukiding