Solidworks tutorial Thread features (Bolt and Nut)

You Can Support our Channel for more tutorials.
in this tutorial we will learn how to make threads with the help of Thread features in Solidworks.
Please subscribe our channel for more videos and projects in Solidworks. Please Like and share Our videos.
Thanks for Watching.

1)Solidworks tutorial for Beginners.

2)Solidworks tutorial : Assembly

3)Solidworks tutorial vertical Stirling Engine

4)Solidworks tutorial Forklift

5)Solidworks tutorial for beginners in Hindi

6)Solidworks tutorial : Assembly in Hindi

7)Solidworks Projects

like Facebook page.

Subscribe our YouTube Channel.

[Envinite]

7:10 You can just check "Thread with start face" option under the Thread options so you dont have to use Cut Extrude to remove the excess thread.

[camarillojohn]

It is obvious that you are a very knowledgeable person in SolidWorks. I had to play it several times to understand you.
Thank you very much.

[anthonymendis]

Hey bud we use metric die for making threads on a shaft as u said M6×1. Der the shaft dia is already 6 and u added threads externally which eventually increased the diameter, everything aside well made tutorial for beginners..👍👍

[EziofromFirenze]

This helped me with my university project, thank you!

[ehb]

Great series of tutorials, I am learning a lot! One quick point -- taps are used to thread holes (aka "tapping") and dies are used to thread shafts.

[sandhyaprabhu]

Hi sir. I'm a beginner to this software and don't have any knowledge of other similar softwares, so I had tried some 100 places to learn but nothing like your tutorials. I never felt like I'm learning from internet even a single time. U teach so precisely mentioning every single command but even then, videos are short and clear to understand even for a novice.

[dennisb]

At 10:07 he initially says the hole thread selection is a DIE, but later corrects it to TAP for the nut hole, so don't get mixed up, a tap threads a hole & die threads a bolt (for reference).

[karanpandey]

You give me total answer, I ask but you fill total doubt. Thanks for this job. Please kept it

[marshal]

One way I did my thread cut was to use a plane on either end of the bolt and nut about 10mm from each surface as a start point and there was no need to edit the ends of the threads because they extended past the ends causing a smooth thread start. Also I chambered my bolt end and nut ends before I even threaded them. They came out perfect with no need to clean up the ends.

[kunalray]

I guess you made both nut and bolt left handed !!!... You can use left hand for nut and right hand for bolt in order to make the components mate at the end. I'm a beginner & learned a lot from ur videos. 🔥🔥🔥🔥🔥plz clarify if I'm right !!

[asanjithajayasekara]

You teach well. Thank you for your video

[abdullah_saeed_]

I love you
Also become excited when you said " fully defined"

[robsylbar]

Hey. Thank you for your teaching. You are really good teacher. I like your lessons. Keep doing it is great job.

[eddielai]

Thank you very much! I enjoyed and learned from your excellent tutorial!

[anashoummadi]

u are doing a perfect job dude thank you I learned so much from u

[smenterprises]

yes, that is absolutely right. you really genius person. as you teaching for us we are appreciate you and god bless for and good look for future.

[ashutoshgupta]

sir, loving your channel. I never liked working on softwares but ur style of explaining is nice and i am literally learning i can say. thank you

[technical]

Mai fan hoo apka sir...
Ek se ek naya chij btate ho aaap love you sir

[aniketvarshney]

One doubt, if this is M6 bolt, then it means it should go through 6mm diameter hole. But if you extrude a thread, won't the maximum diameter increase?

[duttaengineerschoice]

Sir ..this tutrial much help me to learn solid works thnk u 😃