The Charlie Show /// Episode 325 /// Quicrun 10BL120 G2 Brushless System

The Quicrun series of super cost friendly motors and speed controls has received a facelift, and some updates. Feature packed, power filled combos at an amazing price, that offer performance with no holding back. These systems are popular for RTR upgrades or simple builds not needing tons of tuning options. This video walks through unboxing, setup and features you should know about.

System Link:

ESC Manual Link:

The Servo Test Trouble Shooting Video:

HOBBYWING Official Youtube

+++++ Cars & Trucks +++++
Xerun series (Professional grade)
Ezrun series (RTR / MAX upgrade)
QuicRun (starters)

+++++ Helicopters & Airplanes +++++
Platinum Series
Flyfun Series
Skywalker Series
+++++ DRONE +++++
XRotor Pro Series (Pro.Filming /industrial, Gov. research)
XRotor FPV "M" Series (FPV Racing)
XRotor Series
+++++ Marine +++++
SEAKING Pro Series (Speed racing)
SEAKING Series (Marine)

Our mission: Help create memorable moments worldwide.

Copyright & Trademark
HOBBYWING is a registered trademark of Hobbywing technology.
#HOBBYWING #NerdTheNewCool #HDUB

[DJhunta]

Great Clarification for the newbie thank you

[rccvs]

I was looking to change my combo from my Slash Ultimate rig, now I found it, thanks for sharing, great combo !

[Arturito]

Thank you so much for this video. It was incredibly helpful

[arkyrc]

Great overview. I just bought the 4000kv version to replace the 12T Titan in my Rustler. Just waiting for it arrive. Thanks!

[RTmadnesstoo]

I installed one of these in my Bomber with the bigger 3660 motor and it's FANTASTIC! Best Upgrade I ever made.
I like that you can tell when you start 'warming it up' when the fan comes on.

[kennysilvers-zx]

This is the one! Gonna throw it in an AE SCT to see if it can hang with the big boys. Thanks for the post.

[MyKonaRC]

Would the 4000kv be too much (get too hot) for the Traxxas Slash 4X4 with regular gearing? (13/54) Would it be better to get the 3250kv motor instead?

UPDATE: I got the 3250kv motor, its great(for the most part) for the 4x4 slash! Running stock gearing 13/54 the motor gets fairly warm to the touch 40c - 50c. As compared to the Traxxas Velineon 3500 motor, it would be really hot! The one downside with the Hobbywing 3250kv motor is it sucks back the battery faster than the Traxxas Velineon 3500. I am getting about 1/2 to 3/4 the run time as I would with the Traxxas motor, and this is with 0 timing, no drag brake too!

Wonder if I should have went with the 4000kv motor instead?

Final note - I had to reverse two of the motor wires A to C and C to A. I did the set up with throttle first then brake. When I pulled the trigger the car wanted to reverse, so I swapped A cable with C.

[Acknockout]

Always great informative videos ..thank you.. so i cant seem to find out what kv i should run in my 2wd slash and then also my 4×4 slash. I would very much appreciate any advice.

[BriansRCStuff]

Is the G1 still better for 3s speed runs because you are not limited to the 4mm bullet connectors and as they have the same power handling ability?

[frankydank]

Hey nice video Charlie! I want this for my Arrma gorgon, this video has helped a lot but the only thing is my batteries have an ec3 plug, do they sell adapters to convert so I don't have to buy new batteries ?

[aaronboulton]

I want to install this system with the 4000kv motor in my Rlaarlo Ak-787. I am looking for general runs and some mild speed runs. Will this system have plenty of speed and torque for this 1/10 touring car?

[lkwdryan]

I was able to use the OTA on my phone, must have had an update huh? I even have a screenshot of the settings

[davidchiasson]

Is an xt60 connector for this 120amp esc ok?, I'm curious.

[robotwaflle]

Looking for a waterproof brushless setup for my hotshot II. Any suggestions? Would this setup work?

[lucasthompsn]

I'm not certain the fan on the esc is temp sensitive. My fan starts up and continuously runs at power on

[antoniobeltran]

does this work with the hobbywing app?

[Arturito]

So if I have a 4000 kv motor of the timing is at 0 will I get 4000kv and if I turn the timing up I’ll get more kv? Or do I have to have the timing in the medium setting to get the rated 4000 KV the motor has?

[SkunkCity_RC]

I see the 2600kv rating on 4s, will 2400kv have any effects?

[fabricioaraujo]

hello friend ! What do you think of this new esc 10bl120g2? And is it really good? Is the programming card the same as the previous model? I'm wanting to buy this new version of the 10bl120 g2.

[palarisalsaa]

is there a way to increase max reverse force without a programming card?