50cc 49cc Scooter Performance Clutch and Variator install variator roller weights

If you would like to help out in a major way, click the link below to support my channel:

GY6 KIT BUY IT NOW:

kymco performance, adly big bore, Hyusung sense, Cpi performance, 2-stroke scooter upgrades and performance

[jamodpower]

would you mind making a video of how you change the clutch spring please :)

[MrJasonace]

Describe the performance gain you can gain. Trying to get a feel for what to expect. Ty nice video. Id like to see the special tool and it used. Ty

[RollingWrench]

You will need to use a impact gun and when you install the nut you will need a special tool designed to hold the variator in place while torquing

[srossman]

How much performance do you get out of this upgrade? and how much did it cost?

[Blackdovestudios]

Thanks. I don't have a impact driver, but I do have a torque wrench. Do you have torque specs for the clutch and variator bolts?

[GibsonLesPaul]

Dont you need to grease up these parts before installing, I guess not cos you dont want any getting on the pulley/belt but i was gonna simply wipe grease onto these parts using a cloth so they have a thin film of grease, not enough to find its way to the belt?

[ffnlzqf]

I have a Tao Tao 50 it has two shocks in the back.I have experienced A high schilling noise from my scooter .What is that.I also was coming home awhile ago and my scooter would start to slow down and I would wait and go along with it and even stop.Then I would give it a chance and start going again and it would go and then start loosening power again and I would have to start.I would love some great advise from you my friend

[DanesAnimales]

Nice vid. Question, u say that you installed the new (white) spring for extra performance, but what does it do apart from increasing the force needed for the belt to move lower onto the clutch side. Are you allong with this spring also installing a big bore kit?

[RollingWrench]

Its really hard to say through the computer. for starters check your coil be sure its not arcing onto the frame.

[rosewell]

When you are at the point where you want to enchance your scooter's performance, how do you know the new engine parts will actually fit?

[ItsDevlcon]

Is this the same with all scooter types? What is the overall performance increase? And what site would you recommend for ordering these parts?

[tomstoddard]

please tell me where to get that cooling fan this is a 50cc right? Been looking for a none nylon one for ever

[bellevernon]

where can I buy some new pads, springs ect for my 1984 honda spree? I cant find them even on e bay. the clutch needs a makeover

[temperedgamer]

is it important to use a thick belt on a 3kj engine a lighter belt makes it run faster

[watsonthomasb]

Have you ever come across a variator that does not engage all of the way? I have a hard black line (Made up of belt material) about 1/4 of an inch in from the outer edge.  I haven't worked on a variator before but this line makes me thing that the belt isn't making it all the way out to the edge of the variator plate.  Any recommendations?

[bscottme]

is it easy to get the old spring out, and the new spring in? anything i should be on the look out for?

[bogdanme]

Could anyone please give me an explanation:What's the difference between a standard stock scooter variator and the racing variator?because frankly I don't see any difference.
I wait for a valid answer.Thx

[RollingWrench]

Just be careful of the spring compression

[prosimo]

can i ask sir what is the effect if u remove the stock washer on the pulley instead replacing of bigger size

[MREVERYTHING]

Hello Rolling Wrench, I just replaced my battery adjusted the valves and gas lines and air intake valves scooters runs but I am now hearing a ping in my clutch. What could be causing that or should I just get a new clutch? I'm on a fixed income and money is tight so Any ideas? Please help I am MREVERYTHING727