How to cut slots with a router on a track

Dusty shows how to use a router on a track to cut slots for metal slats on a barndoor

[MHTutorialsD]

I thought I was playing the video at 4X speed. Jeez man, did you drink a gallon of coffee ?

[Rumeel]

Would you recommend a DIYer to jump on the 40/80v line up or just jump on the 18v line up?

[trooperc]

Question, should the router be on the opposite side of the track so the base sits flush to the material being routered? The way you have it, the base is "floating". I see the block to help stabilize though on the side.

[paulkc]

Is there any type of dust attachment for use with the plunge base that you're aware of?

[robertgarvey]

Great video. Thanks. Do you have the Makita track saw as well? Do you recommend that tool?

[turtleman]

Dose using the router on the track distroy the splinter guard for the saw or dose it not affect it

[johnnycorn]

Hey Dusty I need to cut circles in my speakerbox faceplates with up to three inches thickness at times, what would be your recommendation to do it as quickly as possible? Awesome vid

[grahambrown]

Your router is rocking off the guide rail. When you assembled the router clamp there would have been an adjuster guide to attached to the clamp that you can set to stop it rocking.

[carterscustomrods]

Anyone know how the 321492-3 (guide bushing adapter) fits with this base?

[jake]

Where`s your eye protection? Wait... you`re a grown ass man. Carry on sir! Thanks for sharing!

[tehwt]

Dusty Lumber co... better than Lusty Dumber

[janbarrettnielsen]

hmm....wondering why you pull the router backwards instead of pushing forwards? It seems counterintuitive since the bit rotates clockwise, and pulling back when having the router on the right side of the wood makes it just run back without cutting as efficiently as the other way around.
And you don't seem to mention that, if you want 90 degree square cuts on the rail, there is 2 tiny plastic inserts for the rail adaptor which lifts the router and the adaptor to those 90 degrees - not using it makes the router cut at a skewed or slightly off angle.
Are my eyes fooling me or did you forget something important?

[jakeb]

All those cool tools and no safety glasses? Nice cut

[GraemeWoller]

Where's your eye and ear protection!