Piping Flange Alignment Tools | Equalizer

Piping Flange Alignment Tools from Equalizer International

Tool available based on various diameter and Pressure ratings
Mechanical type & Hydraulic type flange alignment tool..

Also u can ask to FLANGE TOOL GURU

If you know the flange specification and the flange is of a weld neck type please select the flange specification, class / pressure-rating and nominal diameter from the drop down menus.

The Guru will then recommend the most applicable Equalizer Flange Tool.

thanks to Equalizer International

Watch HERE

#Technicalpiping

[TheSyahdi]

There should be a miss-fit calculation first to check that the pull up the flange together will not introduce cold stress on the pipe especially when it is adjacent of strain sensitive equipment. Piping code, i.e, ASME B31.3 also provide limitation ofmiss alignment, also in ASME PCC-1.
As long as the miss alignment is within the tolerance, i would use this tools.

[epistte]

A hammer and a spud wrench are cheaper, faster and just as effective.

[sgpgamingempire]

How about the pipe stress if you do that by force?

[mohammeddally]

We have many solution for this issue without any equipment.
But this issue mean we have problem during the fabrication or during welding operations

[rinkukhunger]

What about stresses induces to piping system and equipment attached.

[gregorioramos]

Now how do you put the gasket in between if it is to tight.

[feonor]

What about the uneven tilt this creates? You can clearly see at 2:56 the gap at the top is larger than the gap at the bottom.

[kotimoto]

To be used only for mild misalignment, else bolts will be under tension and flange will leak

[akhtarkhan]

Doing alignment by this tool, the joint will be in tension.

[cenajohn]

when we use this tool, how to insert gasket?

[sodeck_gmusic]

Please friends what is the name of that tool they use to bringing the pipe to level.

[solobassoon]

If two flanges meet about 15-20 mm out of center a new pipe fitting contractor should be found. To me a misalignment of that magnitude is unacceptable. By using this method of alignment, the flange faces will be out of parallel which can have devastating consequences for the sealing of the gasket. Furthermore, a non-negligible shear stress on the bolts could mean a blown bolt.

[Timsang]

How if i want to buy this tool..im from indonesia...thank i

[P]

Just like companies that make fishing gear. They aren't in business to catch fish just fishermen.

[speciosa]

Or you could just hire competent pipe fitters

[livelife]

I need this pls send me the equalizer ill make videos in real life refinery and shop work

[winandwin]

Is this correct way, during inspection the owner may ask you to remove the bolt to check whether external load acting in bolt ? and pipe are in align..

[bcornett]

We used line up bars or for big pipe a choker and rachet or chain fall

[MRSTahu]

Mksh tutorial nya, , , semangat terus bosku

[westyscotland]

now you're just putting a load on the bolts to handle that misalignment. When someone eventually has to do maintenance on that flange its going to spring back