Tutorial Inventor - 059 CORNER BLOCK (Part-019)

Показать описание

Every tutorial brings new abilities.
You can slow the film on YouTube by using Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT (English) - If you want the drawings for the parts in my collection of 100 parts you can buy the book ALBUM (4 euros) from Google Play by accessing the below link. Drawings are a universal language.
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!

MISTAKE! My friend @MrRick76 noted that the first extrusion must be 8 and it is 10

Рекомендации по теме

Комментарии

This was a really nice and quick one, especially the revolve cut 😊
Thank you professor

MercedesBenzSLAMG

Prof I was doing this corner block today and noticed that you can just use extrusion with a taper on the revolve cut. Same with the previous design, I just use the taper function on conical holes.

backtoafrica

Hi, The first extrude is incorrect. You say 8 but didn't change it from 10. Nice model to draw. Thanks

MrRick

Tutorial Inventor - 059 CORNER BLOCK (Part-019)

Tutorial Inventor - 059 CORNER BLOCK (Part-019)

Tutorial Inventor - 058 TILTING CLAMP (Part-018)

Tutorial Inventor - 098 RIGHT HALF BEARING (Part-060)

Tutorial Inventor - 105 LEFT BEARING (Part-067)

Tutorial Inventor - 099 CURVED PIPE CONNECTION (Part-061)

Tutorial Inventor - 057 DOUBLE CLIP (Part-017)

Tutorial Inventor - 092 PURGE BLOCK (Part-053)

Tutorial Inventor - 100 TAP BODY (Part-062)

Tutorial Inventor - 061 HIGH FORK (Part-021)

Tutorial Inventor - 107 PIPE CROSS CONNECTOR (Part-069)

Tutorial Inventor - 028 TECHNICAL DRAWING - Chapter 2 (Sections and Views)

Tutorial Inventor - 081 CENTERING PRISM (Part-042)

Tutorial Inventor - 051 SPIGOT (Part-011)

Tutorial Inventor - 065 CONNECTION BODY (Part-025)

Tutorial Inventor - 093 LOWER CASING (Part-054)

Tutorial Inventor - 073 PIVOTING CONNECTION (Part-033)

30 BRASS SUPPORT

Tutorial Inventor - 070 NOTCHED ATTACH (Part-030)

Tutorial Inventor - 184 CAST VISE (3/4)

Tutorial Inventor - 177 DRIVE LEVER (and ASSEMBLY)

Tutorial Inventor - 076 MAIN ARBOR FLANGE (Part-037)

Tutorial Inventor - 095 PIPE FITTING (Part-056)

Tutorial Inventor - 055 FIXING BLOCK (Part-015)

Tutorial Inventor - 018 GENEVA DRIVE - COMPONENTS