Cisco ASA 5505 Firewall initial setup Part 1

In this video i will show you how to setup a Cisco 5505 ASA Firewall and factory default it and then set it up for scratch like new for any location.

[imsun]

Best tutorial ever made. He explains every move slowly which is so awesome to absorb every bit of the tutorial.
Congrats.

[crknipe]

I gave a thumbs up as this helped me get started on my device. I think this covers all the bases without going too far forward. Yea it's probably not the best....but for free, i'd say its highly effective and more than does the trick. Thanks again to the video creator.

[rlmcculley]

Actually, as a neophyte in ASA / AP configurations. I found this to be a very useful video!

[nabilaabdin]

I ❤️ how you break things down nicely, THANK YOU!

[leonardfreid]

Great video. One of the best I have seen. I am actually excited for part 2!

[necromater]

the factory reset was handy piece of info.

[ScottJones]

Wow is this some of the best training on youtube!

[venkateswarlureddy]

Gr8 Thanks. It was very informative. Keep on posting us. Please explain ASA integration to AAA or RADIUS authentication.

[howithink]

Yes, you can separate LAN and WIFI using ASA. Make sure you create 3 vlans. One for outside. One for inside and the last for wifi

[dadygee]

55xx series is a mix from the PIX firewall and the "VPN 3000" series. The vpn 3000 series is absolutly impossible to config with cli :) on the asa you sometimes have to but its not that far from regular router.

[nimishak]

I have changed my ASA IP and the IP is pintable in my laptop which is connected to the wifi, but when I type that IP in ASDM-IDM Launcher with no username and password it gives me an error message "Unable to launch device manager from 192.168.**.**". You have any idea why?

[seanharden]

if you cannot save the information to ASDM, add static ip to your PC then you will be able to connect to ASDM.

Also you can save the changes from the command line...

[FastRedPonyCar]

Is there a specific version of Java JRE needed to actually be able to get into ASDM?  It says that I need to install java webstart.  I installed JRE 6u43 but it is still saying I need to install web start.  I'm on windows 7 32 bit and it says it's cisco ASDM 6.4(1) if that helps.

[imsun]

"Whatever word " is used lot of time which make this tutorial not up to the quality.
He didn't explain IP right way as well.

So far, it was nice tutorial.

[TylerCordaro]

Can you run 2 WAN connection with WAN fail over? thanks for the video

[hamzahamadi]

Thank you for this video but where is the second part :O

[TheChrisjge]

Great, thank you, could not fault it..!

[andrewkramb]

I've gone through the factory default settings and I type the 192.168 address into the address bar, it won't let me get to the ASDM page. It only says IE cannot display the webpage. Any clue what's going on?

[johnfrancisco]

Good quality video, but you keep talking about how I can change to 10 network, or 172 network, or 192 network or whatever. Then you spin your mouse around and type in a bit, then delete.

[spyverman]

is there any compatibility for dyndns?