Happymodel Mobula 8 Factory Setings 02 // Betaflight Config

Показать описание

FlyLion

Рекомендации по теме

Комментарии

Hi, this will be good settings for my mobula 8 uart elrs ? (I mean the pid tuning )

MiDZi

Just got mine, I'm stuck setting up, instructions tell me to flash the esc but Most of the other stuff comes pre set up, do I need to flash the escape with the bluejay software in order to fly or can I skip that step?

oisinogorman

Greetings, I recently started in the fpv buy the radio station master pocket radio and drone mobula 8 uart lrs, select this to bring the version 3.3.0 of elrs
I thought it would be easier, set the transmitter according to some videos set a profile and enter the basic vinding option by connecting and disconnecting the drone battery, the signal appeared on the screen of the transmitter, I put acro mode and moved the controls but nothing happened, When connecting the drone to the betaflight configurator the drone appears but not the transmitter, I have seen many tutorials and moved options, I even installed a firmware that I saw in a video, this without being very sure because it is the first time I deal with the configuration of a drone, I do not know if I have made it worse or what firmware to use to make it work, I do not know what to do, I do not know if you can give me inficacion of the steps to make it work that firmware to use what version, what motor output to use, how to put the ports, in short what is needed, I know it is a lot but I have asked everywhere and no one tells me much, I do not know what to do, I hope you can help me, I do not have much money but if you could help me I would be willing to pay you for your time, hopefully you can help me.

handrusalexisflorezmontaez

I got problem with VTX. My VTX not ready in VTX tab. So i cant change channel at all

SiUmaam

Quick question... What will happen if you reset settings? Just bought a mobula 8 Frsky receiver and CLI gives me error code when I type something and drone goes crazy when i start it. Please help

GRZY.A

Any tips for getting it into bl mode so that I can flash it? Cheers

matthewmaxwell-burton

How did you connect it with your computer?

dinonugget

all of these settings are wrong, the drone does not fly with this setting, do not believe this video

unknw

Happymodel Mobula 8 Factory Setings 02 // Betaflight Config

Happymodel Mobula 8 Factory Setings 02 // Betaflight Config

Happymodel Mobula 8 Factory Setings 01 // Bluejay ESC Config

Mobula8 O3 ExpressLRS Factory Settings // ELRS version 3.0.1// Remove Model Match

Mobula8 O3 Betaflight 4.3.2 Factory Settings

Bind your Mobula8/Mobula7/BassLine(Analog)to ELRS radio the first time #fpv #drone #tx12 #happymodel

Happymodel Mobula 8

Mobula8 O3 ESC Firmware Factory Settings // Bluejay version 19

mobula 8 turtlemode (feat: alone) #shorts

How To - Reset Defaults on Mobula7, Paste Dump File, from Cyclone FPV

Bind the Mobula 7 ELRS to the radio by setting up a binding phrase #fpv #happymodel #mobula7

What’s in the box of the Mobula8? #fpv #drone #happymodel #mobula7

Started drone Mobula 8

Happymodel #Mobula8

Mobula 8 Trim Trim Trim

Mobula 8 binding with Radiomaster pocket radio and configuration

Radiomaster pocket crash course: How to setup and bind? #fpv #elrs #beginners

RadioMaster Pocket - How To Set Up and Bind a Drone - Step by Step

Happymodel Mobula8 ELRS Einrichten + Review 🧑🏻‍🔬

MENCOBA ATAS BAWAH - HAPPYMODEL MOBULA 8 [BANGBUNG BEUREUM]

Mobula 8 o3

How to flip after crash or turtle mode? | Mobula 7 1s Flysky

MOBULA 8 - by Happymodel

Happymodel Mobula8 HD 1-2S 85mm Whoop DJI O3 - review, setup and flight footage

Happymodel Mobula 8 | Beginner Budget king?👑| My favorite 2S whoop so far！