Titan Drawers | Full review of 4wd Supacentre's drawer system

It's no secret that 4wd Supacentre sells the cheapest drawers on the market, but do you get what you pay for or are they worth considering? I've had mine for close to 2 years, so in today's video I'll be sharing my experiences with them and letting you know what I do and don't like!

📸 @exploranger on Insta for pics of the setup/camping trips.

#titandrawers #4wdsupacentre #canopyfitout

[joshstrong]

Mate you're a really great presenter. Good job dude👍

[pulsedesignbranding]

That was a great review, simple right to the point, not a lot of useless banter. Just wish i could get those in the states.

[Gee-Wizz]

I have two sets of these in commercial vehicles, one set would go in and out over 40 times a day 5 days a week and still going strong after nearly three years. Like the review said, a bit rough around the edges but tough as nails. For my purpose I bought a second set and would buy them again.

[timdunn]

I'm happy to swap my Engel 42 for Bianca if you like. Well presented report mate.

[TimsBitsnPieces]

I have an 80 series with barn doors and I love my Titan draws.. they are a great item and didn't break the bank when I bought them back in 2019.

[jaydenlyons]

Great video again mate!

Ive been watching you since your first upload, the content is interesting and you get more and more natural as the uploads keep coming!

[LeonardSwan-rk]

Great video. I have a similar unit made up of 2 single units so I can fit into a Pajero sport. One of the draws does not run smoothly at all any ideas on how I can improve this? All the bearings are fine, suspect the distance between top and bottom bearings may be a bit on the tight side.

[MrFlop]

Love the misso test hahaha nice work mate thanks

[CamperKev]

Thanks for the review. I installed a brand new set of Titan Draws for a friend. It turned into a nightmare job that took all day. I had to pull them apart and repair them before they could be installed. Inside I found sharp poorly cut steel hanging and flapping around, because it was never built correctly. I found rivets that were never seated and rivets missing. It was as rough as you could imagine. The poorest Chinese made rubbish that I have yet found in the 4WD industry. Apart from that, they were way too heavy and too shallow to be useful. Regarding my own vehicle, I paid more and bought Australian made Drifta Draws. Without going into all the details, they are so much better in every way and worth every cent. The most useful modification I have made to my Hilux.

[brownie]

I pulled my draws down and will now use one as a battery 12volt center for mounting to the front of my canopy.

[RustysOutbackAdventures]

Another great video and thanks for the drawer review. I'm still tossing up about whether to install a set of drawers or custom build some sort of storage system.

[SG_oz]

great review thanks. Shame cant get just the fridge side one by itself.. cant seem to find that

[wkdisgood]

Another great upload, Keep up the great work.

[fullysickmeboy]

Gday mate great review got a question I've just bought a set of the draws I've got a 90ltr fridge will it mount on top of the slide and hold it's weight empty and full by chance cheers

[Ramjet]

That intro sound was the same as what Suspicious0bservers YT channel play's in his clips sometimes🤣

[hasaneski]

Mate what's the maximum weight does the top panels on top of the slide draws handle cause my son is a tradesmen and his tool's are very heavy around 300kilos and what's the height messaments of the front thanks

[MrJohnsmiley]

I have the XTM drawer which I got as present over 12 months ago. The key snapped in the barrel recently and NO locksmith can get the barrel. Both BCF and Supercheap are both lacking in any support to even ask the distributor for any spares. So if your considering getting this product then consider an alternative brand as XTM has NO support for product failures.

[oliveerd]

Every one who reviews them says there heavy what are some other models weighing in at.

[kestikiadventures]

How would they go on a Ute tray in terms of water getting in?

[skitzy]

I did have one of those xtm drawer and I was not happy with it. After awhile I ripped it out and now it’s some were in tip..