How to Fill/Patch Spoiler Holes

We are going over the steps to fill OEM spoiler holes for a 2020 Mustang EcoBoost with the intent of installing an aftermarket spoiler. The steps will also include painting the trunk to match the OEM paint.

Important: Rattle can paint is very difficult if not impossible to obtain 100% match as there are just too many variables, especially regarding metallic colors.

1. Intro - 0:01
2. Remove Old Spoiler/Lip - 0:28
3. Step 1 (Chamfer Holes) - 1:07
4. Step 2 (Scuff/Prep Surface) - 1:54
5. Step 3 (Clean Surface) - 2:30
6. Step 4 (Apply Tape) - 2:55
7. Step 5 (Apply Glass Reinforced Filler) - 4:03
8. Step 6 (Sand Glass Filler) - 5:25
9. Step 7 (Clean Surface - IPA) - 5:37
10. Step 8 (Apply Glazing and Spot Putty) - 5:55
11. Step 9 (Sand Spot Putty) - 6:29
12. Step 10 (Wet Sand Surface) - 6:46
13. Step 11 (Clean Surface (In & Out) - IPA) - 7:05
14. Step 12 (Apply Primer (Inside)) - 7:20
------------- Method 1 -------------
15. Step 13 (Prep Surface) - 7:37
16. Step 14 (Apply Sandable Primer) - 7:47
17. Step 15 (Wet Sand Surface) - 8:12
18. Step 16 (Clean Surface - IPA) - 8:28
19. Step 17 (Prep Surface) - 8:39
20. Step 18 (Apply Base Coat) - 9:01
21. Missing Footage Issue
------------- Method 2 -------------
22. Step 19 (Remove Trunk) - 10:28
23. Step 20 (Sand Trunk) - 11:20
24. Step 21 (Wet Sand Trunk) - 14:11
25. Step 22 (Clean Surface - IPA) - 14:56
26. Step 23 (Apply Sandable Primer) - 15:07
27. Step 24 (Wet Sand Surface) - 15:42
28. Step 25 (Clean Surface - IPA) - 16:03
29. Step 26 (Prep Surface) - 16:13
30. Step 27 (Apply Base Coat) - 16:26
31. Step 28 (Prep Surface) - 17:28
32. Step 29 (Apply Clear Coat) - 17:38
33. Step 30 (Install Trunk) - 19:18
34. Show it off! - 19:49

Paint Supplier:

Products Used:
This video contains affiliate links for which I may receive compensation.

Tools:
1/4" Socket Wrench
7mm Socket
10mm Socket
91% Isopropyl Alcohol
40lb Fishing Line
Body Filler Spreaders
Deburring Tool
Disposable Drop Cloth
Drill
Eraser Block
Eraser Wheel
Glass Reinforced Filler
Glazing and Spot Putty
Microfiber Cloth
Mixing Board
Nitrile Gloves
Painter's Tape
Respirator
Safety Glasses
Sandpaper (80-1000 Grit)
Stepper Drill Bits
Soap and Water Solution
Trim Removal Tool Set

Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk.

#HolePatch #SpoilerHoles

[LordOfOlympus]

Very informative, but what this shows me is that I need to take my trunk in so that a professional can do it, lol

[cheddarmac]

I always enjoy seeing your videos! I can tell you put in a lot of work into them. Thanks for all your hard work I have lean so much for you!

[ItsJayote]

Hey man what spoiler did you put on there and does it require drilling, also is there any good 2016 mustang no drill spoilers you recommend?

[crystaljeromey]

I sir love your video and insights please what's the actual name of the deeper end tool you're using that looks like a fork???

[ShawnDeOnTheRise]

Can you fill those holes with JB WELD???

[austingurganus]

Could it be done with normal filler or does it have to be the glass filler?