PI-STAR CONFIGURATION -FIRST TIME

CLICK HERE TO FIND YOUR PI-STAR HOTSPOT:

[vincentdenich]

Great video! Helped me get mine up in 30 mins.

[SteveH-TN]

Thanks for sharing your knowledge and experience in this and your other videos. I only recently began my own experimenting with pi-star and mmdvm hotspots. I am recovering from 2 strokes & currently @75s of age I am realizing I’m not as young as I used to be 😅🐌 73 Steve de AA4SH

[mattcero]

What about firewall rules? Ports? Everyone is behind a firewall now and a video describing what ports and rules need to be configured in a firewall to allow pi-star to communicate behind it. Thanks mate.

[arthurtwoshedsjackson]

Andreas… Do you know how to change the bit that shows up on the dashboard after your calling eg M0FXB /9700 ?? Mine says /INFO and I’ve been though all the tabs and can’t see it. Thanks

[ManuelPinner]

pi star software need to have the ability to use a Adlam Pluto sdr for the wireless medium, that's because DMR is commercial oriented that's why you have to do all this ID and all these numbers and pass words,

[grzegorz]

Hello, I have a question, do you know how to improve RX? only receives from a short distance. The transmitter is ok

[TAZ]

Can I use a base antenna for my Id-52a? and if so can you please recommend.
We live upstate New York and the signals are weak.

[ZAMB]

Hello, I have a question, do you know how to improve RX? only receives from a short distance. The transmitter is ok MMDVM Duplex Hotspot Module Dual Hat v1.3

[johnlane]

Ok I'm lost at wifi builder how do you paste the file in the SD

[barbsblogs]

Hi Audrey iv got my hotspot working as your video and iv set the master server as the brandmeister but I want to get it to work on the phoenix network so I can use it on say TG 235 TG 1 etc any suggestions?

[CinematicTouchProductions]

Thank you for your videos, question: I have raspberry pi zero w for a year and the guy that configured it made it so that when there was no activity (incoming, outgoing traffic) instead of a black screen on my display it would show scrolling across the screen a MMDVM screen saver, well since the I configured it myself but I dont know how to get that screen saver back on to show . it looked very cool, do you know how I can get it turned back on ?

[chrispoon]

I am sorry, I am unable to access pi-star/local

[alanwallis]

Hi just a quick question, I have just upgraded by hotspot to the latest version of Pi-Star since then I have to enable Brandmeister Network enable switch, I don't remember having to do that before, and I see In your video it is not enabled, I have just updated the Pi -Star dashboard and just wondered if this has changed in the new version. appreciate your thoughts ? regards Alan

[thedronehomezone]

Hi, Having tried everything, spent 20+ hours on it, read and tried every option, used five different Image files, my THREE DVMM's dont work, they used to about 18 months ago, they all just sit there saying: Stand by, Booting, Modem Initialising, Acquiring IP address, I can however see it on the Dashboard, modify things in the Configuration, then bizarrely, occasionally one will spring into life when re-plugged in and will either RX but not TX, the next will TX but not RX, next min they stop working, one I cant get anything. Two have Nexion Screens which seem fine, one is a basic plastic case with the blue oled display, all have had the above, many Image files loaded, yes I've updated the Brandmeister Master Password in my Self Care... all are Pi Star 0, all did work, not now 18 months later when tried... any thought appreciated. I have an OpenSpot 2 which works fine.... tried this using Phone Hotspot as well but never see PI-Star AP. although they all used to work with the phone as well... Cheers

[axemanarbor]

if it fails you've got a problem . damn straight I have !