Enable Contact Set in Fusion 360

🙏 Welcome,

In this video you will learn how to "Enable Contact Set" Feature in fusion 360.

Contact :
📞 9723837610

[1]

Hello Guys!

Welcome,

Today we will learn how to use Enable contact set in Fusion 3 60.

[2]

First of all Insert Cam in Current design.

Adjust the cam and Click OK.

Select Base Axle area.

Now, From Assembly select Joint.

From motion select Revolute.

Select the component-1 inner area.

Cam will move to Position.

Adjust the cam.

And click “ok”.

Now, insert follower in current design.

Adjust the Follower.

And click “ok”.

Now, From Assembly select Joint.

Select the component-1 inner area.

Select the component-2 inner area.

From motion select Slider.

Adjust the follower.

And click “ok”.

Right click on Slider symbol.

And click on Edit joint limits.

Click on minimum check-box.

And give value -10mm. So, Follower upper motion will limit.

Click on rest check-box.

And give value 0mm. So follower will rest on current position.

From animate play the motion.

Follower maximum position also be restrict.

So, Click on maximum check-box.

And give value 0mm. So, Follower lower motion will limit.

Now, play animation.

Click “OK”.

From Assembly select the “Enable Contact Set”.

Now, Goto assembly and click on “New Contact Set”.

Select both Components, CAM and Follower.

Click “OK”.

Now, right click on Cam joint and click on Drive joint.

Now animate Joint.

[beanieteamie]

Took a while for you to get to the point, you could have just uploaded this part by itself: 1:42 to 1:50