Fan Curves Master Class with Greenheck

Greg Allen, Application Engineer with Greenheck will be taking a deep dive into fan curves for this presentation. Of course the basics will be discussed but what happens in the real world? How does a fan operate under varying speeds and changes to the system? The attempt here is to provide everyone with a PHD in fan curves within the hour timeframe.

[konstantinosskourkeas]

Presenter is easy to understand and follow. Overall a great video! Greetings from the UK

[TheMinecraftACMan]

For those wanting to look into it in more detail, the "Do not operate region" is where a couple of undesirable conditions known as "surge" and "stall" occur.

In surge, you typically have a more or less unrestricted inlet, and a large volume of air downstream that can allow pressure to build up without escaping.

In stall, you have a flow restriction greater than the maximum static pressure the fan can achieve. Because the fan can't generate enough pressure to get the air moving freely, the flow rate gets stuck in the stall trough. It's not really visible with the fan selected for the video example, but other fan curves can have rather dramatic valleys in them towards the left side of the curve.

Hunting is not an inherent behavior of the fan, it's found when the fan is controlled with a feedback loop (a PID in some form or another), most commonly controlled off of static pressure. If you try to operate in a region of the curve where one static pressure can indicate two different flow rates, you end up in a situation where the controls endlessly ramp the fan speed back and forth, or endlessly move a damper, because it can't settle in to a single operating point.

[tso]

Thank you for this video, really appreciate this👌🏾

[anita]

If we have a fan just as a propeller, without any electric motor, how can I size and select a driver for it( considering the BHP)? Should I divide the BHP in the fan curve by the efficiency of the electric motor?

[avacampbell]

This was incredibly helpful, thank you!

[michaelmorassi]

Is this chart just for your fans, or any fan in any system.