YAESU FTdx10 External Monitor,SAFE,NEW & CHEAP!(FT710/FT101)

YAESU FTdx10 Safe External Monitor,NEW & CHEAP!
After reading about the horror stories regarding this radio as well as the FT 101D and maybe the ft710 i thought I would try and take the risk out of using DVI-D to HDMI Converters and source a DVI monitor that wasn’t expensive but still readily available.
Here is the link to the AOC Monitor from Amazon:

#yaesu #hamradio #subscribe

[alvinnorris]

I have my ftdx10 for over a year and love it. I have a32 inch monitor and it looks great.

[SteveGYTK]

I have add mine for 6 weeks now, great value, and its safe. Happy days.

[zbyszekpodchmielony]

Thank you ! This video will probably save many from the problem ! 🙏 . Yaesu besides choosing a stupid Video connector (although mechanically much better than HDMI !) totally screwed up the job electronically ! but worst of all is the LACK OF ANY INFORMATION ABOUT THE DANGER OF CHIP DAMAGE ON THE MAIN BORD IN THE FABRICALLY CONNECTED MANUAL ! . Great radio ! and here such a blunder . Greetings GL & 73 ! 👍👍👍👍

[SigSoftNC]

Wow thank you. Just when I was about to plug in my dvd-d to hdmi bi-directional cable into my Sony Bravia…getting the AOC instead.

[mogy]

Very nice, I keep saying I'm going to buy a Yaesu FTDX10🙂

[mikemcdonald]

yeah Yaesu screwed the pooch when they put the dvi plug on the back. Fancy new radio and old crappy tech plug on back. Why they couldn't install an hdmi on the back I don't know or usb c like you mentioned. Stupidest cost savings ever. 4 k would have been nice too.

[TingILi]

FTdx-10 kill the entire high-end rig and the FT-710 kills the mid-end below. C/P value ... awesome.

[jamesilott]

Great vid where and what cable did you use, i had problems locating one! Thanks for your content.

[gfvt]

Using an old LG monitor with my FTDX101MP, used the same with an FTDX10. Both radios benefit a lot from having a mouse connected too, saves wear and tear on the touchscreen.

[DeltaXray]

I use a MSI 32 inch 4kUHD monitor with my FtDx10 and have no issues.
My mate on the other hand is using that exact same monitor you have there and it worked for a few weeks and now the monitor cannot find the input signal from the Dx10.

[louisbeijert]

Nice video, is this also possible with a DX1200?

[robertgiuliani]

In watching the video, do you have the monitor set on 1920x1080?

[KEODY-WV-Ares-Ham-Dad-O]

So do they make a DVI to Hdmi or should we stick HDMI to vga?

[keithmarshall]

Did you get the cables with the monitor

[deek]

Would it be safe to use a DVI to VGA cable.

[PhantomWoIf]

if it had a touchscreen that would be cool

[hamradiohack]

Definitely not worth the risk. The issue is hdmi straight through cables wont block hdmi bi directional voltage comands that a modern tv might send into the radio. I think some hdmi only monitors might be safe but im not finding out. I called yaesu on my new ft710 and like the 10 they recommended either use dvi d monitors or some sort of multi converter box unit. I picked up a dell 19 inch pc monitor from local goodwill thriftstore $7.49 and a $12 dvi d sheilded 10 foot cable from my local pc recycling store. Ive noticed on my 710 the resolution is ok on monitor but not as sharp as radio. Good video and similar prices in states on amazon. 73 from kg7hvr

[benpatsy]

You can use a hdmi monitor as long as your dvi d to hdmi lead is unidirectional and not bidirectional.
The fuse that blows in the radio is a surface mount and not a conventional type.

[greyhoundz]

That's looks awesome....I'm jealous lol

[Bilko-MGSX]

After calling Yaesu I found out this has zero to do with cables and everything to do with if your monitor is earthed. Your new monitor is earthed so you will be fine 👍