Eachine Tyro119 Build and Fly

Eachine Tyro119 250mm F4 OSD 6 Inch 3-6S DIY FPV GPS Racing Drone
use coupon code bGhOnEy10 10% off

use coupon code bGhOnEy10 10% off

Item Specification

250mm Racing Frame Kit
Wheelbase: 250mm
Frame arm thickness: 5mm
Frame kit material: 3K carbon fiber

Eachine 2407 1850KV Motor
Lipo: 3-6S

Check out these deals :

1). Black Friday deals:

2). Live Stream:

3). RC Toys:

4). low price deals:

Eachine GPS F4 Flight Controller
Brand Name: Eachine
Model: GPS F4
Main control chip: STM32F405
Gyroscope: MPU6000
Barometer: BMP280
Firmware: Support betaflight / INAV firmware
Integrated OSD, support betaflight configuration & DMA Mode ( F4 MCU controls OSD)
- Support PPM /DSM2/X / IBUS/ SBUS/ XBUS receiver
- with 10V @ 1.2A BEC Output, for VTX or Camera

Eachine 40A 4In1 BLHeli_S ESC
Continuous Current: 40A
Burst current: 45A (10S)
BEC output: 5V @ 2A
Input voltage: 2-6S
Main control chip: 48mhz EFM8BB2
Firmware upgrade: Supports Dshot150-600/Multishot/Oneshot/PWM
MOS: 5X6
Current Sensor: NO
Size: 37.5x37.5mm
Mounting Hole: 30.5x30.5mm
Weight: 15g

DALProp TJ6045 3-blade propeller Brand Name: DALProp
Model: TJ6045
Item Name: 6045 6 Inch 3-Blade Propeller
Color: Black
Quantity: 2 CW & 2 CCW

5.8G 40CH 0/25/200/600mW VTX
Transmitting power:0/25/200/600mW switchable
Channel: 40CH
Full video format: NTSC/PAL

Case size: 19x19x16mm
Weight: 5.5g
Signal system: NTSC / PAL (Switchable)
Resolution ratio(horizontal center): 1200TVL
Video output Signal: cvbs
Image: 16:9
Synchronization method: inter-sync
Camera lens: standard 2.1mm
Lens operating voltage: DC 4.5-40V
Audio: YES

BN-220T GPS Module Brand Name: Beitian
Model: BN-220T

Recommend Lipo Battery 5S 1300-1800mAh 50-85C Lipo Battery

Help support the channel by clicking on some of these links :)
Making a purchase helps even more!!!

The stuff I use :

music
ChillstepWayr - Crying Soul

[jamiespeirs]

An excellent tutorial
I've watched twice

[dmctec]

Greta tutorial. I have Tyro 119 and 129… Do You know which board to select to update Firmware to the new Betaflight 10.9 2023 that now has GPS Rescue and with soft landing I I can't find Matek F405. There are only several Matek SE, OÍA, TE, STD! thank you

[WildCaptures]

Great build and set up video Pete, really appreciate all the details👍 I really enjoy my Tyro 129 and the 119 looks like a great value.

[BigAlFPV]

Excellent build & maiden Pete!! Like to try & get the rest of the Tyro series builds :)

[chd]

Did the the black wire for smart audio everything working fine.
Vtx power all the way to 800mw. Wondering if that’s the true output?
Seems like not to many people have the tyro 119 yet.

[scottgivens]

Yes!!! I Saw this on BG and was hoping to see someone review it! Thank you!!!

[DroneOn]

Clean build. I can't believe how good you got this flying.
Split s, Powerloops over the pool.
You crazy man....lol...rofl.

[swaninwa]

Hi Pete, A question for you. I am thinking of changing the stock camera on the TYRO 119 to the Caddx Turtle v2. Will the current VTX work with the Turtle or do I need to get another VTX? I have been looking looking for the answer but I haven't had any luck yet. It's probably staring me in the face.
Thanks for your videos they have helped me a lot!

[chd]

Did you get the smart audio to work?
Not sure default power output on vtx. I’m guessing 25?
Just got mine together but didn’t try black wire mod yet.

[swaninwa]

Great video. I am building this now following your video. Will be adding the xm+. In the video you show and talk about bridging the left 2 pads for SBUS connection. Which wires or wire go to the bridged pads yellow, black or red? Can you tell me where each wire goes? I might be over thinking this. I assume that if I cut the receiver wires to solder to the above mentioned then the plug on the flight controller is not used. Been flying out of the box drones for a couple years, this is my first build. Thanks for any info you can give me.

[scottgivens]

My goodness! It seems very nimble for a 6" quadcopter! Will you be showing how to use GPS rescue with it in the next one? I tried to use it on another quad and it flipped out and crashed. Im wanting to use this one for a long range build with the R9M receiver

[theresnobodyhere]

It's good value decent quality parts at this price, you made that build look so easy, wonder how long would last on 6s before it fails

[danielfpv]

Hi,
What kind of receiver and transmitter are you using?

[dalawaabril]

One of my motors turns with more pronounced "detents". I disconnected two of its wires, thinking that I had bungled the solder job, but it still turns the same. The other three motors turn with what I would describe as much shallower detents. Anything to worry about? I have not applied power, but will place an automotive lightbulb in series with the drone to limit current.

[MrTechjesse]

Tyro119 wants to fly long Awesome build and vid, I like it!! :) Thanks!

[electroddxful]

Great review and build Pete. 👍👍👍👍👍👍👍👍👍👍

[keithhenderson]

I love a good build video. This looks like a nice kit and a pleasure to put together. Thanks for sharing :)

[marvinfadri]

hello RC escape, can you do a video for tyro 119 where calibrate the gps and gyro? I have no idea on how to calibrate fpv drones thanks

[ChaddyFPV]

Eachine made a lot of Tyros.
69
79
89??
99
109
119
129
139??
what's next??
Awesome review Pete!!!!👍😎🤘

[fixbox]

I have got the same model and I have just finişhed the building, I have done all the betaflight settings as u have done onlu difference from yours is I m using flysky i6x transmiter and connect the ppm port on flight controler and do the ppm settings on beta receiver mode. My problem is every thing seems ok on betaflight motors works just fine vhen its connected to beta but vhen ı tried to hit the trotle it runs but dorsnt slows down when ı pulled the trotle down and also when ı sudden move on right stick it cuts the motors all in a sudden stops all of them. Please help if you know the answer. Ps: ı tried bouth with the props and without all the same. Even eith 4s battery but still the same.