Greenworks Optimow Installation Guide

preview_player
Показать описание
This guide will help you install your new Greenworks Optimow robotic mower.

Visit our official website for more information about the Optimow robotic lawn mowers:

#greenworkstv #optimow #greenworks
Рекомендации по теме
Комментарии
Автор

I'm here trying to set up this lawn mover here, reading the quick guide and the thick manual.. I couldn't understand how to set it up, so I came here to try and understand how it is done, but I'm not any wiser.. Your guides are absolutely lackluster.. Why is there a cable going out of the station in the middle? Wouldn't that mean the mover won't get past the line? And where did suddenly three cables come from, and why were they clipped in to the blue chip? I have so many questions.

kimmossige
Автор

All I get is flashing blue. I have one wire into G1 like the guide says. Do both ends need to be connected to the base?

cheesehead
Автор

I have set the mower up, initially with no guide wirer as it seemed optional. The mower cut out in the middle Of the garden. I installed the guide wire out10 feet from the station and buried the end of the wire in the ground. it still cuts out. What am I doing wrong?

Do I have to lay out the boundary wire and once connected to both sides of the charging station then choose a point in the boundary wire, cut it and insert both ends into that small connector with the guidance wire?

bagspacked
Автор

Still don't understand the 'guide' wire. Does it have to be connected at some point to the perimeter wire or can it come out of the docking station into the middle of the lawn, let's say to guide the mower back?

And it says the guide wire is optional. If you didn't have it, how would it steer itself correctly back to the charging base?

shootinglight
Автор

Hello if im in holiday, can thé robot work without my phone bluetooth?

nskf
Автор

Is anyone having trouble with the battery running low quickly? Also is there a way to replace the battery?

benprofessab
Автор

buongiorno, come si installa un filo guida per portare il robot in una seconda area di taglio attraverso una zona stretta 80 cm? Grazie
hello, how do you install a guide wire to take the robot to a second cutting area through a narrow 80 cm area? Thanks

giuseppefumeihd
Автор

The Optimow Greenworks app is better with instructions

benprofessab
Автор

couldn't even hire a narrater! this tech is still years off

mmafan
Автор

It's a horrible guide, as the complete online manual. There is a lot of lacks. It's not clear what / how connect the wires

Pedro-qpri
welcome to shbcf.ru